Contract 0xaFF90532E2937fF290009521e7e120ed062d4F34 1

/**
 *Submitted for verification at snowtrace.io on 2021-11-10
*/

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol


pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol


pragma solidity >=0.6.0 <0.8.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: @openzeppelin/contracts/math/Math.sol


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}

// File: contracts/Cliff.sol


pragma solidity ^0.6.12;





/**
 * @title Cliff
 * @dev A token holder contract that can release its token balance with a cliff period.
 * Optionally revocable by the owner.
 */
contract Cliff {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;

    uint256 public constant SECONDS_PER_MONTH = 30 days;

    event Released(uint256 amount);

    // beneficiary of tokens after they are released
    address public immutable beneficiary;
    IERC20 public immutable token;

    uint256 public immutable cliffInMonths;
    uint256 public immutable startTimestamp;
    uint256 public released;

    /**
     * @dev Creates a cliff contract that locks its balance of any ERC20 token and
     * only allows release to the beneficiary once the cliff has passed.
     * @param _beneficiary address of the beneficiary to whom vested tokens are transferred
     * @param _cliffInMonths duration in months of the cliff in which tokens will begin to vest
     */
    constructor(
        address _token,
        address _beneficiary,
        uint256 _startTimestamp,
        uint256 _cliffInMonths
    ) public {
        require(
            _beneficiary != address(0),
            "Cliff: Beneficiary cannot be empty"
        );

        token = IERC20(_token);
        beneficiary = _beneficiary;
        cliffInMonths = _cliffInMonths;
        startTimestamp = _startTimestamp == 0
            ? blockTimestamp()
            : _startTimestamp;
    }

    /**
     * @notice Transfers vested tokens to beneficiary.
     */
    function release() external {
        uint256 vested = vestedAmount();
        require(vested > 0, "Cliff: No tokens to release");

        released = released.add(vested);
        token.safeTransfer(beneficiary, vested);

        emit Released(vested);
    }

    /**
     * @dev Calculates the amount that has already vested but hasn't been released yet.
     */
    function vestedAmount() public view returns (uint256) {
        if (blockTimestamp() < startTimestamp) {
            return 0;
        }

        uint256 elapsedTime = blockTimestamp().sub(startTimestamp);
        uint256 elapsedMonths = elapsedTime.div(SECONDS_PER_MONTH);

        if (elapsedMonths < cliffInMonths) {
            return 0;
        } else {
            return token.balanceOf(address(this));
        }
    }

    function blockTimestamp() public view virtual returns (uint256) {
        return block.timestamp;
    }
}

[{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"address","name":"_beneficiary","type":"address"},{"internalType":"uint256","name":"_startTimestamp","type":"uint256"},{"internalType":"uint256","name":"_cliffInMonths","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Released","type":"event"},{"inputs":[],"name":"SECONDS_PER_MONTH","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"beneficiary","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"blockTimestamp","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"cliffInMonths","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"release","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"released","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startTimestamp","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vestedAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

0000000000000000000000006e84a6216ea6dacc71ee8e6b0a5b7322eebc0fdd0000000000000000000000005d3e4c0fe11e0ae4c32f0ff74b4544c49538ac610000000000000000000000000000000000000000000000000000000060e06d600000000000000000000000000000000000000000000000000000000000000003

-----Decoded View---------------
Arg [0] : _token (address): 0x6e84a6216ea6dacc71ee8e6b0a5b7322eebc0fdd
Arg [1] : _beneficiary (address): 0x5d3e4c0fe11e0ae4c32f0ff74b4544c49538ac61
Arg [2] : _startTimestamp (uint256): 1625320800
Arg [3] : _cliffInMonths (uint256): 3

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 0000000000000000000000006e84a6216ea6dacc71ee8e6b0a5b7322eebc0fdd
Arg [1] : 0000000000000000000000005d3e4c0fe11e0ae4c32f0ff74b4544c49538ac61
Arg [2] : 0000000000000000000000000000000000000000000000000000000060e06d60
Arg [3] : 0000000000000000000000000000000000000000000000000000000000000003

23156:2333:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23246:51;;;:::i;:::-;;;;;;;;;;;;;;;;23399:36;;;:::i;:::-;;;;-1:-1:-1;;;;;23399:36:0;;;;;;;;;;;;;;24935:438;;;:::i;24553:267::-;;;:::i;:::-;;23480:38;;;:::i;23571:23::-;;;:::i;25381:105::-;;;:::i;23525:39::-;;;:::i;23442:29::-;;;:::i;23246:51::-;23290:7;23246:51;:::o;23399:36::-;;;:::o;24935:438::-;24980:7;25023:14;25004:16;:14;:16::i;:::-;:33;25000:74;;;-1:-1:-1;25061:1:0;25054:8;;25000:74;25086:19;25108:36;25129:14;25108:16;:14;:16::i;:::-;:20;;:36::i;:::-;25086:58;-1:-1:-1;25155:21:0;25179:34;25086:58;23290:7;25179:15;:34::i;:::-;25155:58;;25246:13;25230;:29;25226:140;;;25283:1;25276:8;;;;;;25226:140;25324:30;;;-1:-1:-1;;;25324:30:0;;25348:4;25324:30;;;;;;-1:-1:-1;;;;;25324:5:0;:15;;;;:30;;;;;;;;;;;;;;:15;:30;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;25324:30:0;;-1:-1:-1;25317:37:0;;-1:-1:-1;;25317:37:0;24935:438;;:::o;24553:267::-;24592:14;24609;:12;:14::i;:::-;24592:31;;24651:1;24642:6;:10;24634:50;;;;;-1:-1:-1;;;24634:50:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;24708:8;;:20;;24721:6;24708:12;:20::i;:::-;24697:8;:31;24739:39;-1:-1:-1;;;;;24739:5:0;:18;24758:11;24771:6;24739:18;:39::i;:::-;24796:16;;;;;;;;;;;;;;;;;24553:267;:::o;23480:38::-;;;:::o;23571:23::-;;;;:::o;25381:105::-;25463:15;25381:105;:::o;23525:39::-;;;:::o;23442:29::-;;;:::o;6099:158::-;6157:7;6190:1;6185;:6;;6177:49;;;;;-1:-1:-1;;;6177:49:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;6244:5:0;;;6099:158::o;7214:153::-;7272:7;7304:1;7300;:5;7292:44;;;;;-1:-1:-1;;;7292:44:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;7358:1;7354;:5;;;;;;;7214:153;-1:-1:-1;;;7214:153:0:o;5637:179::-;5695:7;5727:5;;;5751:6;;;;5743:46;;;;;-1:-1:-1;;;5743:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;5807:1;5637:179;-1:-1:-1;;;5637:179:0:o;18999:177::-;19109:58;;;-1:-1:-1;;;;;19109:58:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;19109:58:0;-1:-1:-1;;;19109:58:0;;;19082:86;;19102:5;;19082:19;:86::i;:::-;18999:177;;;:::o;21304:761::-;21728:23;21754:69;21782:4;21754:69;;;;;;;;;;;;;;;;;21762:5;-1:-1:-1;;;;;21754:27:0;;;:69;;;;;:::i;:::-;21838:17;;21728:95;;-1:-1:-1;21838:21:0;21834:224;;21980:10;21969:30;;;;;;;;;;;;;;;-1:-1:-1;21969:30:0;21961:85;;;;-1:-1:-1;;;21961:85:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13994:195;14097:12;14129:52;14151:6;14159:4;14165:1;14168:12;14129:21;:52::i;:::-;14122:59;13994:195;-1:-1:-1;;;;13994:195:0:o;15046:530::-;15173:12;15231:5;15206:21;:30;;15198:81;;;;-1:-1:-1;;;15198:81:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;15298:18;15309:6;15298:10;:18::i;:::-;15290:60;;;;;-1:-1:-1;;;15290:60:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;15424:12;15438:23;15465:6;-1:-1:-1;;;;;15465:11:0;15485:5;15493:4;15465:33;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;15465:33:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;15423:75;;;;15516:52;15534:7;15543:10;15555:12;15516:17;:52::i;:::-;15509:59;15046:530;-1:-1:-1;;;;;;;15046:530:0:o;11076:422::-;11443:20;11482:8;;;11076:422::o;17586:742::-;17701:12;17730:7;17726:595;;;-1:-1:-1;17761:10:0;17754:17;;17726:595;17875:17;;:21;17871:439;;18138:10;18132:17;18199:15;18186:10;18182:2;18178:19;18171:44;18086:148;18281:12;18274:20;;-1:-1:-1;;;18274:20:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

ipfs://6699e330adce95f01d30e119a4635e6523dacaae16f3e7c24ab707a5308badd1