Contract 0xbef8f941f0b9ff97355435974fa2a124b647c8e1

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20Burnable.sol";
import "@openzeppelin/contracts/math/Math.sol";

import "./lib/SafeMath8.sol";
import "./owner/Operator.sol";
import "./interfaces/IOracle.sol";

contract Tomb is ERC20Burnable, Operator {
    using SafeMath8 for uint8;
    using SafeMath for uint256;

    // Initial distribution for the first 24h genesis pools
    uint256 public constant INITIAL_GENESIS_POOL_DISTRIBUTION = 425 ether;
    // Initial distribution for the day 0-2 TOMB-WFTM LP -> TOMB pool
    uint256 public constant INITIAL_TOMB_POOL_DISTRIBUTION = 1575 ether;
    // Distribution for airdrops wallet
    uint256 public constant INITIAL_AIRDROP_WALLET_DISTRIBUTION = 0 ether;

    // Have the rewards been distributed to the pools
    bool public rewardPoolDistributed = false;

    /* ================= Taxation =============== */
    // Address of the Oracle
    address public tombOracle;
    // Address of the Tax Office
    address public taxOffice;

    // Current tax rate
    uint256 public taxRate;
    // Price threshold below which taxes will get burned
    uint256 public burnThreshold = 1.10e18;
    // Address of the tax collector wallet
    address public taxCollectorAddress;

    // Should the taxes be calculated using the tax tiers
    bool public autoCalculateTax;

    // Tax Tiers
    uint256[] public taxTiersTwaps = [0, 5e17, 6e17, 7e17, 8e17, 9e17, 9.5e17, 1e18, 1.05e18, 1.10e18, 1.20e18, 1.30e18, 1.40e18, 1.50e18];
    uint256[] public taxTiersRates = [2000, 1900, 1800, 1700, 1600, 1500, 1500, 1500, 1500, 1400, 900, 400, 200, 100];

    // Sender addresses excluded from Tax
    mapping(address => bool) public excludedAddresses;

    event TaxOfficeTransferred(address oldAddress, address newAddress);

    modifier onlyTaxOffice() {
        require(taxOffice == msg.sender, "Caller is not the tax office");
        _;
    }

    modifier onlyOperatorOrTaxOffice() {
        require(isOperator() || taxOffice == msg.sender, "Caller is not the operator or the tax office");
        _;
    }

    /**
     * @notice Constructs the TOMB ERC-20 contract.
     */
    constructor(uint256 _taxRate, address _taxCollectorAddress) public ERC20("GOLD", "GOLD") {
        // Mints 1 TOMB to contract creator for initial pool setup
        require(_taxRate < 10000, "tax equal or bigger to 100%");
        //require(_taxCollectorAddress != address(0), "tax collector address must be non-zero address");

        excludeAddress(address(this));

        _mint(msg.sender, 1 ether);
        taxRate = _taxRate;
        taxCollectorAddress = _taxCollectorAddress;
    }

    /* ============= Taxation ============= */

    function getTaxTiersTwapsCount() public view returns (uint256 count) {
        return taxTiersTwaps.length;
    }

    function getTaxTiersRatesCount() public view returns (uint256 count) {
        return taxTiersRates.length;
    }

    function isAddressExcluded(address _address) public view returns (bool) {
        return excludedAddresses[_address];
    }

    function setTaxTiersTwap(uint8 _index, uint256 _value) public onlyTaxOffice returns (bool) {
        require(_index >= 0, "Index has to be higher than 0");
        require(_index < getTaxTiersTwapsCount(), "Index has to lower than count of tax tiers");
        if (_index > 0) {
            require(_value > taxTiersTwaps[_index - 1]);
        }
        if (_index < getTaxTiersTwapsCount().sub(1)) {
            require(_value < taxTiersTwaps[_index + 1]);
        }
        taxTiersTwaps[_index] = _value;
        return true;
    }

    function setTaxTiersRate(uint8 _index, uint256 _value) public onlyTaxOffice returns (bool) {
        require(_index >= 0, "Index has to be higher than 0");
        require(_index < getTaxTiersRatesCount(), "Index has to lower than count of tax tiers");
        taxTiersRates[_index] = _value;
        return true;
    }

    function setBurnThreshold(uint256 _burnThreshold) public onlyTaxOffice returns (bool) {
        burnThreshold = _burnThreshold;
    }

    function _getTombPrice() internal view returns (uint256 _tombPrice) {
        try IOracle(tombOracle).consult(address(this), 1e18) returns (uint144 _price) {
            return uint256(_price);
        } catch {
            revert("Tomb: failed to fetch TOMB price from Oracle");
        }
    }

    function _updateTaxRate(uint256 _tombPrice) internal returns (uint256){
        if (autoCalculateTax) {
            for (uint8 tierId = uint8(getTaxTiersTwapsCount()).sub(1); tierId >= 0; --tierId) {
                if (_tombPrice >= taxTiersTwaps[tierId]) {
                    require(taxTiersRates[tierId] < 10000, "tax equal or bigger to 100%");
                    taxRate = taxTiersRates[tierId];
                    return taxTiersRates[tierId];
                }
            }
        }
    }

    function enableAutoCalculateTax() public onlyTaxOffice {
        autoCalculateTax = true;
    }

    function disableAutoCalculateTax() public onlyTaxOffice {
        autoCalculateTax = false;
    }

    function setTombOracle(address _tombOracle) public onlyOperatorOrTaxOffice {
        require(_tombOracle != address(0), "oracle address cannot be 0 address");
        tombOracle = _tombOracle;
    }

    function setTaxOffice(address _taxOffice) public onlyOperatorOrTaxOffice {
        require(_taxOffice != address(0), "tax office address cannot be 0 address");
        emit TaxOfficeTransferred(taxOffice, _taxOffice);
        taxOffice = _taxOffice;
    }

    function setTaxCollectorAddress(address _taxCollectorAddress) public onlyTaxOffice {
        require(_taxCollectorAddress != address(0), "tax collector address must be non-zero address");
        taxCollectorAddress = _taxCollectorAddress;
    }

    function setTaxRate(uint256 _taxRate) public onlyTaxOffice {
        require(!autoCalculateTax, "auto calculate tax cannot be enabled");
        require(_taxRate < 10000, "tax equal or bigger to 100%");
        taxRate = _taxRate;
    }

    function excludeAddress(address _address) public onlyOperatorOrTaxOffice returns (bool) {
        require(!excludedAddresses[_address], "address can't be excluded");
        excludedAddresses[_address] = true;
        return true;
    }

    function includeAddress(address _address) public onlyOperatorOrTaxOffice returns (bool) {
        require(excludedAddresses[_address], "address can't be included");
        excludedAddresses[_address] = false;
        return true;
    }

    /**
     * @notice Operator mints TOMB to a recipient
     * @param recipient_ The address of recipient
     * @param amount_ The amount of TOMB to mint to
     * @return whether the process has been done
     */
    function mint(address recipient_, uint256 amount_) public onlyOperator returns (bool) {
        uint256 balanceBefore = balanceOf(recipient_);
        _mint(recipient_, amount_);
        uint256 balanceAfter = balanceOf(recipient_);

        return balanceAfter > balanceBefore;
    }

    function burn(uint256 amount) public override {
        super.burn(amount);
    }

    function burnFrom(address account, uint256 amount) public override onlyOperator {
        super.burnFrom(account, amount);
    }

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        uint256 currentTaxRate = 0;
        bool burnTax = false;

        if (autoCalculateTax) {
            uint256 currentTombPrice = _getTombPrice();
            currentTaxRate = _updateTaxRate(currentTombPrice);
            if (currentTombPrice < burnThreshold) {
                burnTax = true;
            }
        }


        if (currentTaxRate == 0 || excludedAddresses[sender]) {
            _transfer(sender, recipient, amount);
        } else {
            _transferWithTax(sender, recipient, amount, burnTax);
        }

        _approve(sender, _msgSender(), allowance(sender, _msgSender()).sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    function _transferWithTax(
        address sender,
        address recipient,
        uint256 amount,
        bool burnTax
    ) internal returns (bool) {
        uint256 taxAmount = amount.mul(taxRate).div(10000);
        uint256 amountAfterTax = amount.sub(taxAmount);

        if(burnTax) {
            // Burn tax
            super.burnFrom(sender, taxAmount);
        } else {
            // Transfer tax to tax collector
            _transfer(sender, taxCollectorAddress, taxAmount);
        }

        // Transfer amount after tax to recipient
        _transfer(sender, recipient, amountAfterTax);

        return true;
    }

    /**
     * @notice distribute to reward pool (only once)
     */
    function distributeReward(
        address _genesisPool,
        address _tombPool
        //address _airdropWallet
    ) external onlyOperator {
        require(!rewardPoolDistributed, "only can distribute once");
        require(_genesisPool != address(0), "!_genesisPool");
        require(_tombPool != address(0), "!_tombPool");
        //require(_airdropWallet != address(0), "!_airdropWallet");
        rewardPoolDistributed = true;
        _mint(_genesisPool, INITIAL_GENESIS_POOL_DISTRIBUTION);
        _mint(_tombPool, INITIAL_TOMB_POOL_DISTRIBUTION);
        //_mint(_tombPool, INITIAL_TOMB_POOL_DISTRIBUTION);
        //_mint(_airdropWallet, INITIAL_AIRDROP_WALLET_DISTRIBUTION);
    }

    function governanceRecoverUnsupported(
        IERC20 _token,
        uint256 _amount,
        address _to
    ) external onlyOperator {
        _token.transfer(_to, _amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./ERC20.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    using SafeMath for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath8 {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint8 a, uint8 b) internal pure returns (uint8) {
        uint8 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint8 a, uint8 b) internal pure returns (uint8) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint8 a, uint8 b, string memory errorMessage) internal pure returns (uint8) {
        require(b <= a, errorMessage);
        uint8 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint8 a, uint8 b) internal pure returns (uint8) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint8 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint8 a, uint8 b) internal pure returns (uint8) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint8 a, uint8 b, string memory errorMessage) internal pure returns (uint8) {
        require(b > 0, errorMessage);
        uint8 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint8 a, uint8 b) internal pure returns (uint8) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint8 a, uint8 b, string memory errorMessage) internal pure returns (uint8) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/GSN/Context.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

contract Operator is Context, Ownable {
    address private _operator;

    event OperatorTransferred(address indexed previousOperator, address indexed newOperator);

    constructor() internal {
        _operator = _msgSender();
        emit OperatorTransferred(address(0), _operator);
    }

    function operator() public view returns (address) {
        return _operator;
    }

    modifier onlyOperator() {
        require(_operator == msg.sender, "operator: caller is not the operator");
        _;
    }

    function isOperator() public view returns (bool) {
        return _msgSender() == _operator;
    }

    function transferOperator(address newOperator_) public onlyOwner {
        _transferOperator(newOperator_);
    }

    function _transferOperator(address newOperator_) internal {
        require(newOperator_ != address(0), "operator: zero address given for new operator");
        emit OperatorTransferred(address(0), newOperator_);
        _operator = newOperator_;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

interface IOracle {
    function update() external;

    function consult(address _token, uint256 _amountIn) external view returns (uint144 amountOut);

    function twap(address _token, uint256 _amountIn) external view returns (uint144 _amountOut);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/Context.sol";

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"inputs":[{"internalType":"uint256","name":"_taxRate","type":"uint256"},{"internalType":"address","name":"_taxCollectorAddress","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOperator","type":"address"},{"indexed":true,"internalType":"address","name":"newOperator","type":"address"}],"name":"OperatorTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldAddress","type":"address"},{"indexed":false,"internalType":"address","name":"newAddress","type":"address"}],"name":"TaxOfficeTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"INITIAL_AIRDROP_WALLET_DISTRIBUTION","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"INITIAL_GENESIS_POOL_DISTRIBUTION","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"INITIAL_TOMB_POOL_DISTRIBUTION","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"autoCalculateTax","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"burnThreshold","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"disableAutoCalculateTax","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_genesisPool","type":"address"},{"internalType":"address","name":"_tombPool","type":"address"}],"name":"distributeReward","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"enableAutoCalculateTax","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"excludeAddress","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"excludedAddresses","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTaxTiersRatesCount","outputs":[{"internalType":"uint256","name":"count","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTaxTiersTwapsCount","outputs":[{"internalType":"uint256","name":"count","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_token","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"address","name":"_to","type":"address"}],"name":"governanceRecoverUnsupported","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"includeAddress","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"isAddressExcluded","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isOperator","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient_","type":"address"},{"internalType":"uint256","name":"amount_","type":"uint256"}],"name":"mint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"operator","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardPoolDistributed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_burnThreshold","type":"uint256"}],"name":"setBurnThreshold","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_taxCollectorAddress","type":"address"}],"name":"setTaxCollectorAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_taxOffice","type":"address"}],"name":"setTaxOffice","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_taxRate","type":"uint256"}],"name":"setTaxRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint8","name":"_index","type":"uint8"},{"internalType":"uint256","name":"_value","type":"uint256"}],"name":"setTaxTiersRate","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint8","name":"_index","type":"uint8"},{"internalType":"uint256","name":"_value","type":"uint256"}],"name":"setTaxTiersTwap","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_tombOracle","type":"address"}],"name":"setTombOracle","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"taxCollectorAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"taxOffice","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"taxRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"taxTiersRates","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"taxTiersTwaps","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tombOracle","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOperator_","type":"address"}],"name":"transferOperator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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