Contract Name:
TombGenesisRewardPool
Contract Source Code:
File 1 of 1 : TombGenesisRewardPool
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// File: @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: gladiator-finance-contracts/contracts/glad_core/TombGenesisRewardPool.sol
pragma solidity 0.8.9;
// based on https://ftmscan.com/address/0x9a896d3c54d7e45b558bd5fff26bf1e8c031f93b#code
// and https://ftmscan.com/address/0xeebfa3528a2e5fa1292db33ae10d0847e914a9af#code
// Note that this pool has no minter key of TOMB (rewards).
// Instead, the governance will call TOMB distributeReward method and send reward to this pool at the beginning.
contract TombGenesisRewardPool {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// governance
address public operator;
// Info of each user.
struct UserInfo {
uint256 amount; // How many tokens the user has provided.
uint256 rewardDebt; // Reward debt. See explanation below.
}
// Info of each pool.
struct PoolInfo {
IERC20 token; // Address of LP token contract.
bool isStarted; // if lastRewardBlock has passed
uint256 allocPoint; // How many allocation points assigned to this pool. TOMB to distribute.
uint256 lastRewardTime; // Last time that TOMB distribution occurs.
uint256 accTombPerShare; // Accumulated TOMB per share, times 1e18. See below.
uint256 supply; // Pool supply
}
IERC20 public tomb;
// Info of each pool.
PoolInfo[] public poolInfo;
// Info of each user that stakes LP tokens.
mapping(uint256 => mapping(address => UserInfo)) public userInfo;
// Total allocation points. Must be the sum of all allocation points in all pools.
uint256 public totalAllocPoint = 0;
// The time when TOMB mining starts.
uint256 public poolStartTime;
// The time when TOMB mining ends.
uint256 public poolEndTime;
address public daoFundAddress;
// MAINNET
uint256 public tombPerSecond = 40000 ether / uint256(1 days); // 40000 TOMB / (24h * 60min * 60s)
uint256 public runningTime = 1 days; // 1 days
// END MAINNET
event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
event EmergencyWithdraw(
address indexed user,
uint256 indexed pid,
uint256 amount
);
event RewardPaid(address indexed user, uint256 amount);
constructor(
address _tomb,
address _daoFund,
uint256 _poolStartTime
) {
require(block.timestamp < _poolStartTime, "late");
if (_tomb != address(0)) tomb = IERC20(_tomb);
if (_daoFund != address(0)) daoFundAddress = _daoFund;
poolStartTime = _poolStartTime;
poolEndTime = poolStartTime + runningTime;
operator = msg.sender;
}
modifier onlyOperator() {
require(
operator == msg.sender,
"TombGenesisPool: caller is not the operator"
);
_;
}
function checkPoolDuplicate(IERC20 _token) internal view {
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
require(
poolInfo[pid].token != _token,
"TombGenesisPool: existing pool?"
);
}
}
// Add a new token to the pool. Can only be called by the owner.
function add(
uint256 _allocPoint,
IERC20 _token,
bool _withUpdate,
uint256 _lastRewardTime
) public onlyOperator {
checkPoolDuplicate(_token);
if (_withUpdate) {
massUpdatePools();
}
if (block.timestamp < poolStartTime) {
// chef is sleeping
if (_lastRewardTime == 0) {
_lastRewardTime = poolStartTime;
} else {
if (_lastRewardTime < poolStartTime) {
_lastRewardTime = poolStartTime;
}
}
} else {
// chef is cooking
if (_lastRewardTime == 0 || _lastRewardTime < block.timestamp) {
_lastRewardTime = block.timestamp;
}
}
bool _isStarted = (_lastRewardTime <= poolStartTime) ||
(_lastRewardTime <= block.timestamp);
poolInfo.push(
PoolInfo({
token: _token,
isStarted: _isStarted,
allocPoint: _allocPoint,
lastRewardTime: _lastRewardTime,
accTombPerShare: 0,
supply: 0
})
);
if (_isStarted) {
totalAllocPoint = totalAllocPoint.add(_allocPoint);
}
}
// Update the given pool's TOMB allocation point. Can only be called by the owner.
function set(uint256 _pid, uint256 _allocPoint) public onlyOperator {
massUpdatePools();
PoolInfo storage pool = poolInfo[_pid];
if (pool.isStarted) {
totalAllocPoint = totalAllocPoint.sub(pool.allocPoint).add(
_allocPoint
);
}
pool.allocPoint = _allocPoint;
}
// Return accumulate rewards over the given _from to _to block.
function getGeneratedReward(uint256 _fromTime, uint256 _toTime)
public
view
returns (uint256)
{
if (_fromTime >= _toTime) return 0;
if (_toTime >= poolEndTime) {
if (_fromTime >= poolEndTime) return 0;
if (_fromTime <= poolStartTime)
return poolEndTime.sub(poolStartTime).mul(tombPerSecond);
return poolEndTime.sub(_fromTime).mul(tombPerSecond);
} else {
if (_toTime <= poolStartTime) return 0;
if (_fromTime <= poolStartTime)
return _toTime.sub(poolStartTime).mul(tombPerSecond);
return _toTime.sub(_fromTime).mul(tombPerSecond);
}
}
// View function to see pending TOMB on frontend.
function pendingTOMB(uint256 _pid, address _user)
external
view
returns (uint256)
{
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_user];
uint256 accTombPerShare = pool.accTombPerShare;
uint256 tokenSupply = pool.supply;
if (block.timestamp > pool.lastRewardTime && tokenSupply != 0) {
uint256 _generatedReward = getGeneratedReward(
pool.lastRewardTime,
block.timestamp
);
uint256 _tombReward = _generatedReward.mul(pool.allocPoint).div(
totalAllocPoint
);
accTombPerShare = accTombPerShare.add(
_tombReward.mul(1e18).div(tokenSupply)
);
}
return user.amount.mul(accTombPerShare).div(1e18).sub(user.rewardDebt);
}
// Update reward variables for all pools. Be careful of gas spending!
function massUpdatePools() public {
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
updatePool(pid);
}
}
// Update reward variables of the given pool to be up-to-date.
function updatePool(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
if (block.timestamp <= pool.lastRewardTime) {
return;
}
uint256 tokenSupply = pool.supply;
if (tokenSupply == 0) {
pool.lastRewardTime = block.timestamp;
return;
}
if (!pool.isStarted) {
pool.isStarted = true;
totalAllocPoint = totalAllocPoint.add(pool.allocPoint);
}
if (totalAllocPoint > 0) {
uint256 _generatedReward = getGeneratedReward(
pool.lastRewardTime,
block.timestamp
);
uint256 _tombReward = _generatedReward.mul(pool.allocPoint).div(
totalAllocPoint
);
pool.accTombPerShare = pool.accTombPerShare.add(
_tombReward.mul(1e18).div(tokenSupply)
);
}
pool.lastRewardTime = block.timestamp;
}
// Deposit LP tokens.
function deposit(uint256 _pid, uint256 _amount) public {
address _sender = msg.sender;
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_sender];
updatePool(_pid);
if (user.amount > 0) {
uint256 _pending = user
.amount
.mul(pool.accTombPerShare)
.div(1e18)
.sub(user.rewardDebt);
if (_pending > 0) {
safeTombTransfer(_sender, _pending);
emit RewardPaid(_sender, _pending);
}
}
if (_amount > 0) {
pool.token.safeTransferFrom(_sender, address(this), _amount);
uint256 depositDebt = _amount.mul(100).div(10000);
user.amount = user.amount.add(_amount.sub(depositDebt));
pool.supply = pool.supply.add(_amount.sub(depositDebt));
pool.token.safeTransfer(daoFundAddress, depositDebt);
}
user.rewardDebt = user.amount.mul(pool.accTombPerShare).div(1e18);
emit Deposit(_sender, _pid, _amount);
}
// Withdraw LP tokens.
function withdraw(uint256 _pid, uint256 _amount) public {
address _sender = msg.sender;
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_sender];
require(user.amount >= _amount, "withdraw: not good");
updatePool(_pid);
uint256 _pending = user.amount.mul(pool.accTombPerShare).div(1e18).sub(
user.rewardDebt
);
if (_pending > 0) {
safeTombTransfer(_sender, _pending);
emit RewardPaid(_sender, _pending);
}
if (_amount > 0) {
user.amount = user.amount.sub(_amount);
pool.supply = pool.supply.sub(_amount);
pool.token.safeTransfer(_sender, _amount);
}
user.rewardDebt = user.amount.mul(pool.accTombPerShare).div(1e18);
emit Withdraw(_sender, _pid, _amount);
}
// Withdraw without caring about rewards. EMERGENCY ONLY.
function emergencyWithdraw(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
uint256 _amount = user.amount;
user.amount = 0;
pool.supply = pool.supply.sub(_amount);
user.rewardDebt = 0;
pool.token.safeTransfer(msg.sender, _amount);
emit EmergencyWithdraw(msg.sender, _pid, _amount);
}
// Safe TOMB transfer function, just in case if rounding error causes pool to not have enough TOMBs.
function safeTombTransfer(address _to, uint256 _amount) internal {
uint256 totalSupply;
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
PoolInfo storage pool = poolInfo[pid];
if (address(tomb) == address(pool.token)) {
totalSupply = pool.supply;
break;
}
}
uint256 _tombBalance = tomb.balanceOf(address(this)).sub(totalSupply);
if (_tombBalance > 0) {
if (_amount > _tombBalance) {
tomb.safeTransfer(_to, _tombBalance);
} else {
tomb.safeTransfer(_to, _amount);
}
}
}
function setOperator(address _operator) external onlyOperator {
operator = _operator;
}
function governanceRecoverUnsupported(
IERC20 _token,
uint256 amount,
address to
) external onlyOperator {
if (block.timestamp < poolEndTime + 33 days) {
// do not allow to drain core token (TOMB or lps) if less than 33 days after pool ends
require(_token != tomb, "tomb");
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
PoolInfo storage pool = poolInfo[pid];
require(_token != pool.token, "pool.token");
}
}
_token.safeTransfer(to, amount);
}
}