Contract 0xfc5A1A6EB076a2C7aD06eD22C90d7E710E35ad0a 7

Contract Overview

Balance:
0 AVAX

AVAX Value:
$0.00

Token:
Txn Hash Method
Block
From
To
Value [Txn Fee]
0x953d2bc374dadb77a44ccb06a891b285121efc5ffa2da0ffe3ddff29754fbd9bSet Tokens Per I...145380372022-05-11 3:23:285 days 11 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0xb58db578609405bf05659ab78bad16d069bc9d767d52d48c46d1426e2d138608Set Tokens Per I...142466852022-05-04 4:17:2912 days 10 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x02a5497abae95cd800b796c8a8ec53eb1bbd5008a52c1fc672558053dfefde7cSet Tokens Per I...139507562022-04-27 3:39:2919 days 11 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0xcefa7b5d14e92b60716ce8433c030a046edd7b2e4c603f7da4be211a8d60fc59Set Tokens Per I...136497142022-04-20 3:16:0526 days 11 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x4ab9354943a483079115fc14bd7ab15e1fd7bda7cd9ea210e77fd679c9e6923aSet Tokens Per I...133474272022-04-13 2:32:0633 days 12 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0xb49dc2484f9c89cf065f04e8d265798cdf1b335117c756301f5e19fc845bf9e4Set Tokens Per I...130475712022-04-06 2:03:0640 days 13 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x3c6aa11697fa7469345b001959d4dec9deca01c774506466cb89f2480b229047Transfer129109442022-04-02 19:19:3543 days 19 hrs agoBinance: C-Chain Hot Wallet IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a8.79 AVAX0.00345138164
0xfb9191f33c4e2a44ecd2aaf3a9d749b8f96a9de6787b0bbefa5d34b1714fd207Set Tokens Per I...127567282022-03-30 4:26:1847 days 10 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0xd322753e0843748b96b7347415c0fa7609f43fbf18a969f790e73dddf60af6a8Set Tokens Per I...124567902022-03-23 2:55:4354 days 12 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x30ca654f91eb0e036443b2b3fe04c7bf5e72bb44d220e23932edea49bcf0bb31Set Tokens Per I...121681352022-03-16 4:24:0361 days 10 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0xf663bef332b1627fdff19afea09cb6c0e26eae27c39c1859e1f4e430659570e4Set Tokens Per I...118705062022-03-09 2:12:2668 days 12 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0xb27814612c844f0245044f77e199bd4fdcba8cedcbdc259d5fc3efa665d9f23aSet Tokens Per I...115694842022-03-02 1:50:3375 days 13 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x8ae6abbf0b6d216dd4998a52dc87f5952e16ac837c9e8624f2d05f61041fc27cSet Tokens Per I...112741882022-02-23 2:21:1082 days 12 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0xd7d152ac095bdf1cbb51d5077d695e802123c09f5d342d0c1b12f0f5f7d514f3Set Tokens Per I...109800492022-02-16 3:49:2689 days 11 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x79f61b445539ea76b3b23391e9d871e81aaa02c46a6b57f58deea6bf176d1a27Set Tokens Per I...106764672022-02-09 3:03:0296 days 12 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x133a24366da63ed2ea4d87d6b90d2c30fa8079cd29322344deace3ea660ebc68Set Tokens Per I...103693762022-02-02 2:56:42103 days 12 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x6ca7783c5d13221ba11c2af26562a7ea9ee3631af2190ce851e483e9aaff2097Set Tokens Per I...100650732022-01-26 4:10:41110 days 10 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0xc33c976b9c267d94b777f9ab2abc42721652511701cefc0afdb6f4471d1cfb7dSet Tokens Per I...100290812022-01-25 8:20:13111 days 6 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0089819100
0x0055e22afbdf31745b2abf6cc1dc9577c51233100151c373587083e65813c03bSet Tokens Per I...98547892022-01-21 8:11:02115 days 6 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.002245475 25
0x01b46917cb123fe966d3e6ced7ede32d1e49ccc5870b8f0990573ae1dff8255bSet Tokens Per I...98546252022-01-21 8:05:34115 days 7 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.002245175 25
0x7421ee57ebb167ccce488329a16a676e03a76e664bf27a3f4ee876c006410b56Set Tokens Per I...97605942022-01-19 3:37:10117 days 11 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.002245175 25
0x4631c55cb8f81fc866f908fd6571add3dc4092caf2cdeee949a13745f606507fSet Tokens Per I...94559162022-01-12 4:25:05124 days 10 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.002244875 25
0x46ae65a160962b12101212832508c56daf06959d19668c09d7b4dc7fe366d560Set Tokens Per I...94557402022-01-12 4:19:05124 days 10 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.002245175 25
0x9a52570ddc1dbfa9f7358a69c9d1fea568c95a8faeaf6f33a890b41f5be28836Set Gov92079742022-01-06 11:13:55130 days 3 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.0026999100
0x6fbe2c00708ed0b57377b2c02b5302f2b76d3320e9b58e63fe483cb42068c936Set Tokens Per I...92049702022-01-06 9:33:23130 days 5 hrs ago0x5f799f365fa8a2b60ac0429c48b153ca5a6f0cf8 IN  0xfc5a1a6eb076a2c7ad06ed22c90d7e710e35ad0a0 AVAX0.002243975 25
[ Download CSV Export 
Parent Txn Hash Block From To Value
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
RewardDistributor

Compiler Version
v0.6.12+commit.27d51765

Optimization Enabled:
Yes with 1 runs

Other Settings:
default evmVersion

Contract Source Code (Solidity Standard Json-Input format)

File 1 of 9 : RewardDistributor.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "../libraries/math/SafeMath.sol";
import "../libraries/token/IERC20.sol";
import "../libraries/token/SafeERC20.sol";
import "../libraries/utils/ReentrancyGuard.sol";

import "./interfaces/IRewardDistributor.sol";
import "./interfaces/IRewardTracker.sol";
import "../access/Governable.sol";

contract RewardDistributor is IRewardDistributor, ReentrancyGuard, Governable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    address public override rewardToken;
    uint256 public override tokensPerInterval;
    uint256 public lastDistributionTime;
    address public rewardTracker;

    address public admin;

    event Distribute(uint256 amount);
    event TokensPerIntervalChange(uint256 amount);

    modifier onlyAdmin() {
        require(msg.sender == admin, "RewardDistributor: forbidden");
        _;
    }

    constructor(address _rewardToken, address _rewardTracker) public {
        rewardToken = _rewardToken;
        rewardTracker = _rewardTracker;
        admin = msg.sender;
    }

    function setAdmin(address _admin) external onlyGov {
        admin = _admin;
    }

    // to help users who accidentally send their tokens to this contract
    function withdrawToken(address _token, address _account, uint256 _amount) external onlyGov {
        IERC20(_token).safeTransfer(_account, _amount);
    }

    function updateLastDistributionTime() external onlyAdmin {
        lastDistributionTime = block.timestamp;
    }

    function setTokensPerInterval(uint256 _amount) external onlyAdmin {
        require(lastDistributionTime != 0, "RewardDistributor: invalid lastDistributionTime");
        IRewardTracker(rewardTracker).updateRewards();
        tokensPerInterval = _amount;
        emit TokensPerIntervalChange(_amount);
    }

    function pendingRewards() public view override returns (uint256) {
        if (block.timestamp == lastDistributionTime) {
            return 0;
        }

        uint256 timeDiff = block.timestamp.sub(lastDistributionTime);
        return tokensPerInterval.mul(timeDiff);
    }

    function distribute() external override returns (uint256) {
        require(msg.sender == rewardTracker, "RewardDistributor: invalid msg.sender");
        uint256 amount = pendingRewards();
        if (amount == 0) { return 0; }

        lastDistributionTime = block.timestamp;

        uint256 balance = IERC20(rewardToken).balanceOf(address(this));
        if (amount > balance) { amount = balance; }

        IERC20(rewardToken).safeTransfer(msg.sender, amount);

        emit Distribute(amount);
        return amount;
    }
}

File 2 of 9 : SafeMath.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

File 3 of 9 : IERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

File 4 of 9 : SafeERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "./IERC20.sol";
import "../math/SafeMath.sol";
import "../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

File 5 of 9 : ReentrancyGuard.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

File 6 of 9 : IRewardDistributor.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

interface IRewardDistributor {
    function rewardToken() external view returns (address);
    function tokensPerInterval() external view returns (uint256);
    function pendingRewards() external view returns (uint256);
    function distribute() external returns (uint256);
}

File 7 of 9 : IRewardTracker.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

interface IRewardTracker {
    function depositBalances(address _account, address _depositToken) external view returns (uint256);
    function stakedAmounts(address _account) external view returns (uint256);
    function updateRewards() external;
    function stake(address _depositToken, uint256 _amount) external;
    function stakeForAccount(address _fundingAccount, address _account, address _depositToken, uint256 _amount) external;
    function unstake(address _depositToken, uint256 _amount) external;
    function unstakeForAccount(address _account, address _depositToken, uint256 _amount, address _receiver) external;
    function tokensPerInterval() external view returns (uint256);
    function claim(address _receiver) external returns (uint256);
    function claimForAccount(address _account, address _receiver) external returns (uint256);
    function claimable(address _account) external view returns (uint256);
    function averageStakedAmounts(address _account) external view returns (uint256);
    function cumulativeRewards(address _account) external view returns (uint256);
}

File 8 of 9 : Governable.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

contract Governable {
    address public gov;

    constructor() public {
        gov = msg.sender;
    }

    modifier onlyGov() {
        require(msg.sender == gov, "Governable: forbidden");
        _;
    }

    function setGov(address _gov) external onlyGov {
        gov = _gov;
    }
}

File 9 of 9 : Address.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

Settings
{
  "optimizer": {
    "enabled": true,
    "runs": 1
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

Contract ABI

[{"inputs":[{"internalType":"address","name":"_rewardToken","type":"address"},{"internalType":"address","name":"_rewardTracker","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Distribute","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokensPerIntervalChange","type":"event"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"distribute","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"gov","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lastDistributionTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardTracker","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_admin","type":"address"}],"name":"setAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_gov","type":"address"}],"name":"setGov","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"setTokensPerInterval","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"tokensPerInterval","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"updateLastDistributionTime","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"address","name":"_account","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdrawToken","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

000000000000000000000000ff1489227bbaac61a9209a08929e4c2a526ddd170000000000000000000000002bd10f8e93b3669b6d42e74eeedc65dd1b0a1342

-----Decoded View---------------
Arg [0] : _rewardToken (address): 0xff1489227bbaac61a9209a08929e4c2a526ddd17
Arg [1] : _rewardTracker (address): 0x2bd10f8e93b3669b6d42e74eeedc65dd1b0a1342

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000ff1489227bbaac61a9209a08929e4c2a526ddd17
Arg [1] : 0000000000000000000000002bd10f8e93b3669b6d42e74eeedc65dd1b0a1342


Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.