Contract 0x400d75dAb26bBc18D163AEA3e83D9Ea68F6c1804 8

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: UNLICENSED

pragma solidity 0.8.10;

library InputStream {
  function createStream(bytes memory data) internal pure returns (uint256 stream) {
    assembly {
      stream := mload(0x40)
      mstore(0x40, add(stream, 64))
      mstore(stream, data)
      let length := mload(data)
      mstore(add(stream, 32), add(data, length))
    }
  }

  function isNotEmpty(uint256 stream) internal pure returns (bool) {
    uint256 pos;
    uint256 finish;
    assembly {
      pos := mload(stream)
      finish := mload(add(stream, 32))
    }
    return pos < finish;
  }

  function readUint8(uint256 stream) internal pure returns (uint8 res) {
    assembly {
      let pos := mload(stream)
      pos := add(pos, 1)
      res := mload(pos)
      mstore(stream, pos)
    }
  }

  function readUint16(uint256 stream) internal pure returns (uint16 res) {
    assembly {
      let pos := mload(stream)
      pos := add(pos, 2)
      res := mload(pos)
      mstore(stream, pos)
    }
  }

  function readUint32(uint256 stream) internal pure returns (uint32 res) {
    assembly {
      let pos := mload(stream)
      pos := add(pos, 4)
      res := mload(pos)
      mstore(stream, pos)
    }
  }

  function readUint(uint256 stream) internal pure returns (uint256 res) {
    assembly {
      let pos := mload(stream)
      pos := add(pos, 32)
      res := mload(pos)
      mstore(stream, pos)
    }
  }

  function readAddress(uint256 stream) internal pure returns (address res) {
    assembly {
      let pos := mload(stream)
      pos := add(pos, 20)
      res := mload(pos)
      mstore(stream, pos)
    }
  }

  function readBytes(uint256 stream) internal pure returns (bytes memory res) {
    assembly {
      let pos := mload(stream)
      res := add(pos, 32)
      let length := mload(res)
      mstore(stream, add(res, length))
    }
  }
}

// SPDX-License-Identifier: UNLICENSED

pragma solidity 0.8.10;

import '../interfaces/IUniswapV2Pair.sol';
import '../interfaces/IBentoBoxMinimal.sol';
import '../interfaces/IPool.sol';
import '../interfaces/IWETH.sol';
import './InputStream.sol';
import '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';

address constant NATIVE_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;

/// @title A route processor for the Sushi Aggregator
/// @author Okavango
contract RouteProcessor {
  using SafeERC20 for IERC20;
  using InputStream for uint256;

  IBentoBoxMinimal public immutable bentoBox;

  uint private unlocked = 1;
  modifier lock() {
      require(unlocked == 1, 'RouteProcessor is locked');
      unlocked = 2;
      _;
      unlocked = 1;
  }

  constructor(address _bentoBox) {
    bentoBox = IBentoBoxMinimal(_bentoBox);
  }

  /// @notice For native unwrapping
  receive() external payable {}

  /// @notice Processes the route generated off-chain. Has a lock
  /// @param tokenIn Address of the input token
  /// @param amountIn Amount of the input token
  /// @param tokenOut Address of the output token
  /// @param amountOutMin Minimum amount of the output token
  /// @return amountOut Actual amount of the output token
  function processRoute(
    address tokenIn,
    uint256 amountIn,
    address tokenOut,
    uint256 amountOutMin,
    address to,
    bytes memory route
  ) external payable lock returns (uint256 amountOut) {
    return processRouteInternal(tokenIn, amountIn, tokenOut, amountOutMin, to, route);
  }

  /// @notice Transfers some value to <transferValueTo> and then processes the route
  /// @param transferValueTo Address where the value should be transferred
  /// @param amountValueTransfer How much value to transfer
  /// @param tokenIn Address of the input token
  /// @param amountIn Amount of the input token
  /// @param tokenOut Address of the output token
  /// @param amountOutMin Minimum amount of the output token
  /// @return amountOut Actual amount of the output token
  function transferValueAndprocessRoute(
    address payable transferValueTo,
    uint256 amountValueTransfer,
    address tokenIn,
    uint256 amountIn,
    address tokenOut,
    uint256 amountOutMin,
    address to,
    bytes memory route
  ) external payable lock returns (uint256 amountOut) {
    (bool success, bytes memory returnBytes) = transferValueTo.call{value: amountValueTransfer}('');
    require(success, string(abi.encodePacked(returnBytes)));
    return processRouteInternal(tokenIn, amountIn, tokenOut, amountOutMin, to, route);
  }

  /// @notice Processes the route generated off-chain
  /// @param tokenIn Address of the input token
  /// @param amountIn Amount of the input token
  /// @param tokenOut Address of the output token
  /// @param amountOutMin Minimum amount of the output token
  /// @return amountOut Actual amount of the output token
  function processRouteInternal(
    address tokenIn,
    uint256 amountIn,
    address tokenOut,
    uint256 amountOutMin,
    address to,
    bytes memory route
  ) private returns (uint256 amountOut) {
    uint256 amountInAcc = 0;
    uint256 balanceInitial = tokenOut == NATIVE_ADDRESS ? 
      address(to).balance : IERC20(tokenOut).balanceOf(to);

    uint256 stream = InputStream.createStream(route);
    while (stream.isNotEmpty()) {
      uint8 commandCode = stream.readUint8();
      if (commandCode < 20) {
        if (commandCode == 10)
          swapUniswapPool(stream); // Sushi/Uniswap pool swap
        else if (commandCode == 4)
          distributeERC20Shares(stream); // distribute ERC20 tokens from this router to pools
        else if (commandCode == 3)
          amountInAcc += distributeERC20Amounts(stream, tokenIn); // initial distribution
        else if (commandCode == 5)
          amountInAcc += wrapAndDistributeERC20Amounts(stream); // wrap natives and initial distribution        
        else if (commandCode == 6) 
          unwrapNative(to, stream);
        else if (commandCode == 7)
          amountInAcc += distributeERC20AmountsFromRP(stream, tokenIn); // initial distribution
        else revert('Unknown command code');
      } else if (commandCode < 24) {
        if (commandCode == 20) bentoDepositAmountFromBento(stream, tokenIn);
        else if (commandCode == 21) swapTrident(stream);
        else if (commandCode == 23) bentoWithdrawShareFromRP(stream, tokenIn);
        else revert('Unknown command code');
      } else {
        if (commandCode == 24) amountInAcc += distributeBentoShares(stream, tokenIn);
        else if (commandCode == 25) distributeBentoPortions(stream);
        else if (commandCode == 26) bentoDepositAllFromBento(stream);
        else if (commandCode == 27) bentoWithdrawAllFromRP(stream);
        else revert('Unknown command code');
      }
    }

    require(amountInAcc == amountIn, 'Wrong amountIn value');
    uint256 balanceFinal = tokenOut == NATIVE_ADDRESS ? 
      address(to).balance : IERC20(tokenOut).balanceOf(to);
    require(balanceFinal >= balanceInitial + amountOutMin, 'Minimal ouput balance violation');

    amountOut = balanceFinal - balanceInitial;
  }

  /// @notice Transfers input tokens sent to BentoBox to a pool
  /// @notice Expected to be called for initial liquidity transfer from user to BentoBox, so we know exact amounts
  /// @param stream [Pool, Amount]. Pool into which an amount of tokens will be transferred
  /// @param token Address of the token to transfer
  function bentoDepositAmountFromBento(uint256 stream, address token) private {
    address to = stream.readAddress();
    uint256 amount = stream.readUint();
    bentoBox.deposit(token, address(bentoBox), to, amount, 0);
  }

  /// @notice Transfers all available input tokens from BentoBox to a pool
  /// @param stream [Pool, Token]. Pool into which all tokens will be transferred 
  function bentoDepositAllFromBento(uint256 stream) private {
    address to = stream.readAddress();
    address token = stream.readAddress();

    uint256 amount = IERC20(token).balanceOf(address(bentoBox)) +
      bentoBox.strategyData(token).balance -
      bentoBox.totals(token).elastic;
    bentoBox.deposit(token, address(bentoBox), to, amount, 0);
  }

  /// @notice Withdraws BentoBox tokens from BentoBox to an address
  /// @param stream [To, Amount]. Destination where an amount of token will be transferred
  /// @param token Token to transfer
  function bentoWithdrawShareFromRP(uint256 stream, address token) private {
    address to = stream.readAddress();
    uint256 amount = stream.readUint();
    bentoBox.withdraw(token, address(this), to, amount, 0);
  }

  /// @notice Withdraws all available BentoBox tokens from BentoBox to an address
  /// @param stream [Token, To]. Token which will be transferred to a destination
  function bentoWithdrawAllFromRP(uint256 stream) private {
    address token = stream.readAddress();
    address to = stream.readAddress();
    uint256 amount = bentoBox.balanceOf(token, address(this));
    bentoBox.withdraw(token, address(this), to, 0, amount);
  }

  /// @notice Performs a Trident pool swap
  /// @param stream [Pool, SwapData]. Pool against a swap defined by SwapData will be executed
  function swapTrident(uint256 stream) private {
    address pool = stream.readAddress();
    bytes memory swapData = stream.readBytes();
    IPool(pool).swap(swapData);
  }

  /// @notice Performs a Sushi/UniswapV2 pool swap
  /// @param stream [Pool, TokenIn, Direction, To]
  /// @return amountOut Amount of the output token
  function swapUniswapPool(uint256 stream) private returns (uint256 amountOut) {
    address pool = stream.readAddress();
    address tokenIn = stream.readAddress();
    uint8 direction = stream.readUint8();
    address to = stream.readAddress();

    (uint256 r0, uint256 r1, ) = IUniswapV2Pair(pool).getReserves();
    require(r0 > 0 && r1 > 0, 'Wrong pool reserves');
    (uint256 reserveIn, uint256 reserveOut) = direction == 1 ? (r0, r1) : (r1, r0);

    uint256 amountIn = IERC20(tokenIn).balanceOf(pool) - reserveIn;
    uint256 amountInWithFee = amountIn * 997;
    amountOut = (amountInWithFee * reserveOut) / (reserveIn * 1000 + amountInWithFee);
    (uint256 amount0Out, uint256 amount1Out) = direction == 1 ? (uint256(0), amountOut) : (amountOut, uint256(0));
    IUniswapV2Pair(pool).swap(amount0Out, amount1Out, to, new bytes(0));
  }

  /// @notice Distributes input ERC20 tokens from msg.sender to addresses. Tokens should be approved
  /// @notice Expected to be called for initial liquidity transfer from the user to pools, so we know exact amounts
  /// @param stream [ArrayLength, ...[To, Amount][]]. An array of destinations and token amounts
  /// @param token Token to distribute
  /// @return amountTotal Total amount distributed
  function distributeERC20Amounts(uint256 stream, address token) private returns (uint256 amountTotal) {
    uint8 num = stream.readUint8();
    amountTotal = 0;
    for (uint256 i = 0; i < num; ++i) {
      address to = stream.readAddress();
      uint256 amount = stream.readUint();
      amountTotal += amount;
      IERC20(token).safeTransferFrom(msg.sender, to, amount);
    }
  }

  /// @notice Distributes input ERC20 tokens from this contract to addresses. Tokens should be approved
  /// @notice Expected to be called for initial liquidity transfer from the user to pools, so we know exact amounts
  /// @param stream [ArrayLength, ...[To, Amount][]]. An array of destinations and token amounts
  /// @param token Token to distribute
  /// @return amountTotal Total amount distributed
  function distributeERC20AmountsFromRP(uint256 stream, address token) private returns (uint256 amountTotal) {
    uint8 num = stream.readUint8();
    amountTotal = 0;
    for (uint256 i = 0; i < num; ++i) {
      address to = stream.readAddress();
      uint256 amount = stream.readUint();
      amountTotal += amount;
      IERC20(token).safeTransfer(to, amount);
    }
  }

  /// @notice Wraps all native inputs and distributes wrapped ERC20 tokens from RouteProcessor to addresses
  /// @notice Expected to be called for initial liquidity transfer from the user to pools, so we know exact amounts
  /// @param stream [WrapToken, ArrayLength, ...[To, Amount][]]. An array of destinations and token amounts
  /// @return amountTotal Total amount distributed
  function wrapAndDistributeERC20Amounts(uint256 stream) private returns (uint256 amountTotal) {
    address token = stream.readAddress();
    IWETH(token).deposit{value: address(this).balance}();
    uint8 num = stream.readUint8();
    amountTotal = 0;
    for (uint256 i = 0; i < num; ++i) {
      address to = stream.readAddress();
      uint256 amount = stream.readUint();
      amountTotal += amount;
      IERC20(token).safeTransfer(to, amount);
    }
    require(address(this).balance == 0, "RouteProcessor: invalid input amount");
  }

  /// @notice Distributes input BentoBox tokens from msg.sender to addresses. Tokens should be approved
  /// @notice Expected to be called for initial liquidity transfer from the user to pools, so we know exact amounts
  /// @param stream [ArrayLength, ...[To, ShareAmount][]]. An array of destinations and token share amounts
  /// @param token Token to distribute
  /// @return sharesTotal Total shares distributed
  function distributeBentoShares(uint256 stream, address token) private returns (uint256 sharesTotal) {
    uint8 num = stream.readUint8();
    sharesTotal = 0;
    for (uint256 i = 0; i < num; ++i) {
      address to = stream.readAddress();
      uint256 share = stream.readUint();
      sharesTotal += share;
      bentoBox.transfer(token, msg.sender, to, share);
    }
  }

  /// @notice Distributes ERC20 tokens from RouteProcessor to addresses
  /// @notice Quantity for sending is determined by share in 1/65535
  /// @notice During routing we can't predict in advance the actual value of internal swaps because of slippage,
  /// @notice so we have to work with shares - not fixed amounts
  /// @param stream [Token, ArrayLength, ...[To, ShareAmount][]]. Token to distribute. An array of destinations and token share amounts
  function distributeERC20Shares(uint256 stream) private {
    address token = stream.readAddress();
    uint8 num = stream.readUint8();
    uint256 amountTotal = IERC20(token).balanceOf(address(this))
      - 1;     // slot undrain protection

    unchecked {
      for (uint256 i = 0; i < num; ++i) {
        address to = stream.readAddress();
        uint16 share = stream.readUint16();
        uint256 amount = (amountTotal * share) / 65535;
        amountTotal -= amount;
        IERC20(token).safeTransfer(to, amount);
      }
    }
  }

  /// @notice Distributes BentoBox tokens from RouteProcessor to addresses
  /// @notice Quantity for sending is determined by portions in 1/65535.
  /// @notice During routing we can't predict in advance the actual value of internal swaps because of slippage,
  /// @notice so we have to work with portions - not fixed amounts
  /// @param stream [Token, ArrayLength, ...[To, ShareAmount][]]. Token to distribute. An array of destinations and token share amounts
  function distributeBentoPortions(uint256 stream) private {
    address token = stream.readAddress();
    uint8 num = stream.readUint8();
    uint256 amountTotal = bentoBox.balanceOf(token, address(this))
      - 1;     // slot undrain protection

    unchecked {
      for (uint256 i = 0; i < num; ++i) {
        address to = stream.readAddress();
        uint16 share = stream.readUint16();
        uint256 amount = (amountTotal * share) / 65535;
        amountTotal -= amount;
        bentoBox.transfer(token, address(this), to, amount);
      }
    }
  }

  /// @notice Unwraps the Native Token
  /// @param receiver Destination of the unwrapped token
  /// @param stream [Token]. Token to unwrap native
  function unwrapNative(address receiver, uint256 stream) private {
    address token = stream.readAddress();
    IWETH(token).withdraw( IERC20(token).balanceOf(address(this))
      - 1);     // slot undrain protection
    payable(receiver).transfer(address(this).balance);
  }
}

// SPDX-License-Identifier: UNLICENSED

pragma solidity >=0.8.0;

struct Rebase {
    uint128 elastic;
    uint128 base;
}

struct StrategyData {
    uint64 strategyStartDate;
    uint64 targetPercentage;
    uint128 balance; // the balance of the strategy that BentoBox thinks is in there
}

/// @notice A rebasing library
library RebaseLibrary {
    /// @notice Calculates the base value in relationship to `elastic` and `total`.
    function toBase(Rebase memory total, uint256 elastic) internal pure returns (uint256 base) {
        if (total.elastic == 0) {
            base = elastic;
        } else {
            base = (elastic * total.base) / total.elastic;
        }
    }

    /// @notice Calculates the elastic value in relationship to `base` and `total`.
    function toElastic(Rebase memory total, uint256 base) internal pure returns (uint256 elastic) {
        if (total.base == 0) {
            elastic = base;
        } else {
            elastic = (base * total.elastic) / total.base;
        }
    }
}

/// @notice Minimal BentoBox vault interface.
/// @dev `token` is aliased as `address` from `IERC20` for simplicity.
interface IBentoBoxMinimal {
    /// @notice Balance per ERC-20 token per account in shares.
    function balanceOf(address, address) external view returns (uint256);

    /// @dev Helper function to represent an `amount` of `token` in shares.
    /// @param token The ERC-20 token.
    /// @param amount The `token` amount.
    /// @param roundUp If the result `share` should be rounded up.
    /// @return share The token amount represented in shares.
    function toShare(
        address token,
        uint256 amount,
        bool roundUp
    ) external view returns (uint256 share);

    /// @dev Helper function to represent shares back into the `token` amount.
    /// @param token The ERC-20 token.
    /// @param share The amount of shares.
    /// @param roundUp If the result should be rounded up.
    /// @return amount The share amount back into native representation.
    function toAmount(
        address token,
        uint256 share,
        bool roundUp
    ) external view returns (uint256 amount);

    /// @notice Registers this contract so that users can approve it for BentoBox.
    function registerProtocol() external;

    /// @notice Deposit an amount of `token` represented in either `amount` or `share`.
    /// @param token The ERC-20 token to deposit.
    /// @param from which account to pull the tokens.
    /// @param to which account to push the tokens.
    /// @param amount Token amount in native representation to deposit.
    /// @param share Token amount represented in shares to deposit. Takes precedence over `amount`.
    /// @return amountOut The amount deposited.
    /// @return shareOut The deposited amount represented in shares.
    function deposit(
        address token,
        address from,
        address to,
        uint256 amount,
        uint256 share
    ) external payable returns (uint256 amountOut, uint256 shareOut);

    /// @notice Withdraws an amount of `token` from a user account.
    /// @param token_ The ERC-20 token to withdraw.
    /// @param from which user to pull the tokens.
    /// @param to which user to push the tokens.
    /// @param amount of tokens. Either one of `amount` or `share` needs to be supplied.
    /// @param share Like above, but `share` takes precedence over `amount`.
    function withdraw(
        address token_,
        address from,
        address to,
        uint256 amount,
        uint256 share
    ) external returns (uint256 amountOut, uint256 shareOut);

    /// @notice Transfer shares from a user account to another one.
    /// @param token The ERC-20 token to transfer.
    /// @param from which user to pull the tokens.
    /// @param to which user to push the tokens.
    /// @param share The amount of `token` in shares.
    function transfer(
        address token,
        address from,
        address to,
        uint256 share
    ) external;

    /// @dev Reads the Rebase `totals`from storage for a given token
    function totals(address token) external view returns (Rebase memory total);

    function strategyData(address token) external view returns (StrategyData memory total);

    /// @dev Approves users' BentoBox assets to a "master" contract.
    function setMasterContractApproval(
        address user,
        address masterContract,
        bool approved,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    function harvest(
        address token,
        bool balance,
        uint256 maxChangeAmount
    ) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later

pragma solidity >=0.5.0;
pragma experimental ABIEncoderV2;

/// @notice Trident pool interface.
interface IPool {
    /// @notice Executes a swap from one token to another.
    /// @dev The input tokens must've already been sent to the pool.
    /// @param data ABI-encoded params that the pool requires.
    /// @return finalAmountOut The amount of output tokens that were sent to the user.
    function swap(bytes calldata data) external returns (uint256 finalAmountOut);

    /// @notice Executes a swap from one token to another with a callback.
    /// @dev This function allows borrowing the output tokens and sending the input tokens in the callback.
    /// @param data ABI-encoded params that the pool requires.
    /// @return finalAmountOut The amount of output tokens that were sent to the user.
    function flashSwap(bytes calldata data) external returns (uint256 finalAmountOut);

    /// @notice Mints liquidity tokens.
    /// @param data ABI-encoded params that the pool requires.
    /// @return liquidity The amount of liquidity tokens that were minted for the user.
    function mint(bytes calldata data) external returns (uint256 liquidity);

    /// @notice Burns liquidity tokens.
    /// @dev The input LP tokens must've already been sent to the pool.
    /// @param data ABI-encoded params that the pool requires.
    /// @return withdrawnAmounts The amount of various output tokens that were sent to the user.
    function burn(bytes calldata data) external returns (TokenAmount[] memory withdrawnAmounts);

    /// @notice Burns liquidity tokens for a single output token.
    /// @dev The input LP tokens must've already been sent to the pool.
    /// @param data ABI-encoded params that the pool requires.
    /// @return amountOut The amount of output tokens that were sent to the user.
    function burnSingle(bytes calldata data) external returns (uint256 amountOut);

    /// @return A unique identifier for the pool type.
    function poolIdentifier() external pure returns (bytes32);

    /// @return An array of tokens supported by the pool.
    function getAssets() external view returns (address[] memory);

    /// @notice Simulates a trade and returns the expected output.
    /// @dev The pool does not need to include a trade simulator directly in itself - it can use a library.
    /// @param data ABI-encoded params that the pool requires.
    /// @return finalAmountOut The amount of output tokens that will be sent to the user if the trade is executed.
    function getAmountOut(bytes calldata data) external view returns (uint256 finalAmountOut);

    /// @notice Simulates a trade and returns the expected output.
    /// @dev The pool does not need to include a trade simulator directly in itself - it can use a library.
    /// @param data ABI-encoded params that the pool requires.
    /// @return finalAmountIn The amount of input tokens that are required from the user if the trade is executed.
    function getAmountIn(bytes calldata data) external view returns (uint256 finalAmountIn);

    /// @dev This event must be emitted on all swaps.
    event Swap(address indexed recipient, address indexed tokenIn, address indexed tokenOut, uint256 amountIn, uint256 amountOut);

    /// @dev This struct frames output tokens for burns.
    struct TokenAmount {
        address token;
        uint256 amount;
    }
}

// SPDX-License-Identifier: GPL-3.0

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later

pragma solidity 0.8.10;

interface IWETH {
  function deposit() external payable;

  function transfer(address to, uint256 value) external returns (bool);

  function withdraw(uint256) external;
}

{
  "optimizer": {
    "enabled": true,
    "runs": 10000000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

[{"inputs":[{"internalType":"address","name":"_bentoBox","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"bentoBox","outputs":[{"internalType":"contract IBentoBoxMinimal","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"amountIn","type":"uint256"},{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"amountOutMin","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"bytes","name":"route","type":"bytes"}],"name":"processRoute","outputs":[{"internalType":"uint256","name":"amountOut","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address payable","name":"transferValueTo","type":"address"},{"internalType":"uint256","name":"amountValueTransfer","type":"uint256"},{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"uint256","name":"amountIn","type":"uint256"},{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"amountOutMin","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"bytes","name":"route","type":"bytes"}],"name":"transferValueAndprocessRoute","outputs":[{"internalType":"uint256","name":"amountOut","type":"uint256"}],"stateMutability":"payable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0000000000000000000000000711b6026068f736bae6b213031fce978d48e026

-----Decoded View---------------
Arg [0] : _bentoBox (address): 0x0711b6026068f736bae6b213031fce978d48e026

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000000711b6026068f736bae6b213031fce978d48e026