Contract 0x2482ec3928adf1718caa5956608684f5a54e14d0 2

/**
 *Submitted for verification at snowtrace.io on 2021-11-25
*/

// SPDX-License-Identifier: AGPL-3.0-or-later
pragma solidity 0.7.5;


/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrrt(uint256 a) internal pure returns (uint c) {
        if (a > 3) {
            c = a;
            uint b = add( div( a, 2), 1 );
            while (b < c) {
                c = b;
                b = div( add( div( a, b ), b), 2 );
            }
        } else if (a != 0) {
            c = 1;
        }
    }

    /*
     * Expects percentage to be trailed by 00,
    */
    function percentageAmount( uint256 total_, uint8 percentage_ ) internal pure returns ( uint256 percentAmount_ ) {
        return div( mul( total_, percentage_ ), 1000 );
    }

    /*
     * Expects percentage to be trailed by 00,
    */
    function substractPercentage( uint256 total_, uint8 percentageToSub_ ) internal pure returns ( uint256 result_ ) {
        return sub( total_, div( mul( total_, percentageToSub_ ), 1000 ) );
    }

    function percentageOfTotal( uint256 part_, uint256 total_ ) internal pure returns ( uint256 percent_ ) {
        return div( mul(part_, 100) , total_ );
    }

    /**
     * Taken from Hypersonic https://github.com/M2629/HyperSonic/blob/main/Math.sol
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }

    function quadraticPricing( uint256 payment_, uint256 multiplier_ ) internal pure returns (uint256) {
        return sqrrt( mul( multiplier_, payment_ ) );
    }

  function bondingCurve( uint256 supply_, uint256 multiplier_ ) internal pure returns (uint256) {
      return mul( multiplier_, supply_ );
  }
}

library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard}
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target, 
        bytes memory data, 
        string memory errorMessage
    ) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target, 
        bytes memory data, 
        uint256 value, 
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _functionCallWithValue(
        address target, 
        bytes memory data, 
        uint256 weiValue, 
        string memory errorMessage
    ) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }

  /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target, 
        bytes memory data, 
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(
        address target, 
        bytes memory data, 
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success, 
        bytes memory returndata, 
        string memory errorMessage
    ) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }

    function addressToString(address _address) internal pure returns(string memory) {
        bytes32 _bytes = bytes32(uint256(_address));
        bytes memory HEX = "0123456789abcdef";
        bytes memory _addr = new bytes(42);

        _addr[0] = '0';
        _addr[1] = 'x';

        for(uint256 i = 0; i < 20; i++) {
            _addr[2+i*2] = HEX[uint8(_bytes[i + 12] >> 4)];
            _addr[3+i*2] = HEX[uint8(_bytes[i + 12] & 0x0f)];
        }

        return string(_addr);

    }
}

interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

abstract contract ERC20
  is 
    IERC20
  {

  using SafeMath for uint256;

  // TODO comment actual hash value.
  bytes32 constant private ERC20TOKEN_ERC1820_INTERFACE_ID = keccak256( "ERC20Token" );
    
  // Present in ERC777
  mapping (address => uint256) internal _balances;

  // Present in ERC777
  mapping (address => mapping (address => uint256)) internal _allowances;

  // Present in ERC777
  uint256 internal _totalSupply;

  // Present in ERC777
  string internal _name;
    
  // Present in ERC777
  string internal _symbol;
    
  // Present in ERC777
  uint8 internal _decimals;

  /**
   * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
   * a default value of 18.
   *
   * To select a different value for {decimals}, use {_setupDecimals}.
   *
   * All three of these values are immutable: they can only be set once during
   * construction.
   */
  constructor (string memory name_, string memory symbol_, uint8 decimals_) {
    _name = name_;
    _symbol = symbol_;
    _decimals = decimals_;
  }

  /**
   * @dev Returns the name of the token.
   */
  // Present in ERC777
  function name() public view returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the symbol of the token, usually a shorter version of the
   * name.
   */
  // Present in ERC777
  function symbol() public view returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the number of decimals used to get its user representation.
   * For example, if `decimals` equals `2`, a balance of `505` tokens should
   * be displayed to a user as `5,05` (`505 / 10 ** 2`).
   *
   * Tokens usually opt for a value of 18, imitating the relationship between
   * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
   * called.
   *
   * NOTE: This information is only used for _display_ purposes: it in
   * no way affects any of the arithmetic of the contract, including
   * {IERC20-balanceOf} and {IERC20-transfer}.
   */
  // Present in ERC777
  function decimals() public view returns (uint8) {
    return _decimals;
  }

  /**
   * @dev See {IERC20-totalSupply}.
   */
  // Present in ERC777
  function totalSupply() public view override returns (uint256) {
    return _totalSupply;
  }

  /**
   * @dev See {IERC20-balanceOf}.
   */
  // Present in ERC777
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _balances[account];
  }

  /**
   * @dev See {IERC20-transfer}.
   *
   * Requirements:
   *
   * - `recipient` cannot be the zero address.
   * - the caller must have a balance of at least `amount`.
   */
  // Overrideen in ERC777
  // Confirm that this behavior changes 
  function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
    _transfer(msg.sender, recipient, amount);
    return true;
  }

    /**
     * @dev See {IERC20-allowance}.
     */
    // Present in ERC777
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    // Present in ERC777
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(msg.sender, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    // Present in ERC777
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, msg.sender, _allowances[sender][msg.sender]
            .sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender]
            .sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

  /**
   * @dev Moves tokens `amount` from `sender` to `recipient`.
   *
   * This is internal function is equivalent to {transfer}, and can be used to
   * e.g. implement automatic token fees, slashing mechanisms, etc.
   *
   * Emits a {Transfer} event.
   *
   * Requirements:
   *
   * - `sender` cannot be the zero address.
   * - `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `amount`.
   */
  function _transfer(address sender, address recipient, uint256 amount) internal virtual {
    require(sender != address(0), "ERC20: transfer from the zero address");
    require(recipient != address(0), "ERC20: transfer to the zero address");

    _beforeTokenTransfer(sender, recipient, amount);

    _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
    _balances[recipient] = _balances[recipient].add(amount);
    emit Transfer(sender, recipient, amount);
  }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    // Present in ERC777
    function _mint(address account_, uint256 ammount_) internal virtual {
        require(account_ != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address( this ), account_, ammount_);
        _totalSupply = _totalSupply.add(ammount_);
        _balances[account_] = _balances[account_].add(ammount_);
        emit Transfer(address( this ), account_, ammount_);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    // Present in ERC777
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    // Present in ERC777
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */

  /**
   * @dev Hook that is called before any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * will be to transferred to `to`.
   * - when `from` is zero, `amount` tokens will be minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  // Present in ERC777
  function _beforeTokenTransfer( address from_, address to_, uint256 amount_ ) internal virtual { }
}

library Counters {
    using SafeMath for uint256;

    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        // The {SafeMath} overflow check can be skipped here, see the comment at the top
        counter._value += 1;
    }

    function decrement(Counter storage counter) internal {
        counter._value = counter._value.sub(1);
    }
}

interface IERC2612Permit {
    /**
     * @dev Sets `amount` as the allowance of `spender` over `owner`'s tokens,
     * given `owner`'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current ERC2612 nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
}

abstract contract ERC20Permit is ERC20, IERC2612Permit {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;

    bytes32 public DOMAIN_SEPARATOR;

    constructor() {

        uint256 chainID;
        assembly {
            chainID := chainid()
        }

        DOMAIN_SEPARATOR = keccak256(abi.encode(
            keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
            keccak256(bytes(name())),
            keccak256(bytes("1")), // Version
            chainID,
            address(this)
        ));
    }

    /**
     * @dev See {IERC2612Permit-permit}.
     *
     */
    function permit(
        address owner,
        address spender,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "Permit: expired deadline");

        bytes32 hashStruct =
            keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, amount, _nonces[owner].current(), deadline));

        bytes32 _hash = keccak256(abi.encodePacked(uint16(0x1901), DOMAIN_SEPARATOR, hashStruct));

        address signer = ecrecover(_hash, v, r, s);
        require(signer != address(0) && signer == owner, "ZeroSwapPermit: Invalid signature");

        _nonces[owner].increment();
        _approve(owner, spender, amount);
    }

    /**
     * @dev See {IERC2612Permit-nonces}.
     */
    function nonces(address owner) public view override returns (uint256) {
        return _nonces[owner].current();
    }
}

interface IOwnable {
  function manager() external view returns (address);

  function renounceManagement() external;
  
  function pushManagement( address newOwner_ ) external;
  
  function pullManagement() external;
}

contract Ownable is IOwnable {

    address internal _owner;
    address internal _newOwner;

    event OwnershipPushed(address indexed previousOwner, address indexed newOwner);
    event OwnershipPulled(address indexed previousOwner, address indexed newOwner);

    constructor () {
        _owner = msg.sender;
        emit OwnershipPushed( address(0), _owner );
    }

    function manager() public view override returns (address) {
        return _owner;
    }

    modifier onlyManager() {
        require( _owner == msg.sender, "Ownable: caller is not the owner" );
        _;
    }

    function renounceManagement() public virtual override onlyManager() {
        emit OwnershipPushed( _owner, address(0) );
        _owner = address(0);
    }

    function pushManagement( address newOwner_ ) public virtual override onlyManager() {
        require( newOwner_ != address(0), "Ownable: new owner is the zero address");
        emit OwnershipPushed( _owner, newOwner_ );
        _newOwner = newOwner_;
    }
    
    function pullManagement() public virtual override {
        require( msg.sender == _newOwner, "Ownable: must be new owner to pull");
        emit OwnershipPulled( _owner, _newOwner );
        _owner = _newOwner;
    }
}

contract MEMOries is ERC20Permit, Ownable {

    using SafeMath for uint256;

    modifier onlyStakingContract() {
        require( msg.sender == stakingContract );
        _;
    }

    address public stakingContract;
    address public initializer;

    event LogSupply(uint256 indexed epoch, uint256 timestamp, uint256 totalSupply );
    event LogRebase( uint256 indexed epoch, uint256 rebase, uint256 index );
    event LogStakingContractUpdated( address stakingContract );

    struct Rebase {
        uint epoch;
        uint rebase; // 18 decimals
        uint totalStakedBefore;
        uint totalStakedAfter;
        uint amountRebased;
        uint index;
        uint32 timeOccured;
    }
    Rebase[] public rebases;

    uint public INDEX;

    uint256 private constant MAX_UINT256 = ~uint256(0);
    uint256 private constant INITIAL_FRAGMENTS_SUPPLY = 5000000 * 10**9;

    // TOTAL_GONS is a multiple of INITIAL_FRAGMENTS_SUPPLY so that _gonsPerFragment is an integer.
    // Use the highest value that fits in a uint256 for max granularity.
    uint256 private constant TOTAL_GONS = MAX_UINT256 - (MAX_UINT256 % INITIAL_FRAGMENTS_SUPPLY);

    // MAX_SUPPLY = maximum integer < (sqrt(4*TOTAL_GONS + 1) - 1) / 2
    uint256 private constant MAX_SUPPLY = ~uint128(0);  // (2^128) - 1

    uint256 private _gonsPerFragment;
    mapping(address => uint256) private _gonBalances;

    mapping ( address => mapping ( address => uint256 ) ) private _allowedValue;

    constructor() ERC20("Staked GalaxyGoggle", "sGG", 9) ERC20Permit() {
        initializer = msg.sender;
        _totalSupply = INITIAL_FRAGMENTS_SUPPLY;
        _gonsPerFragment = TOTAL_GONS.div(_totalSupply);
    }

    function initialize( address stakingContract_ ) external returns ( bool ) {
        require( msg.sender == initializer );
        require( stakingContract_ != address(0) );
        stakingContract = stakingContract_;
        _gonBalances[ stakingContract ] = TOTAL_GONS;

        emit Transfer( address(0x0), stakingContract, _totalSupply );
        emit LogStakingContractUpdated( stakingContract_ );
        
        initializer = address(0);
        return true;
    }

    function setIndex( uint _INDEX ) external onlyManager() returns ( bool ) {
        require( INDEX == 0 );
        INDEX = gonsForBalance( _INDEX );
        return true;
    }

    /**
        @notice increases MEMOries supply to increase staking balances relative to profit_
        @param profit_ uint256
        @return uint256
     */
    function rebase( uint256 profit_, uint epoch_ ) public onlyStakingContract() returns ( uint256 ) {
        uint256 rebaseAmount;
        uint256 circulatingSupply_ = circulatingSupply();

        if ( profit_ == 0 ) {
            emit LogSupply( epoch_, block.timestamp, _totalSupply );
            emit LogRebase( epoch_, 0, index() );
            return _totalSupply;
        } else if ( circulatingSupply_ > 0 ){
            rebaseAmount = profit_.mul( _totalSupply ).div( circulatingSupply_ );
        } else {
            rebaseAmount = profit_;
        }

        _totalSupply = _totalSupply.add( rebaseAmount );

        if ( _totalSupply > MAX_SUPPLY ) {
            _totalSupply = MAX_SUPPLY;
        }

        _gonsPerFragment = TOTAL_GONS.div( _totalSupply );

        _storeRebase( circulatingSupply_, profit_, epoch_ );

        return _totalSupply;
    }

    /**
        @notice emits event with data about rebase
        @param previousCirculating_ uint
        @param profit_ uint
        @param epoch_ uint
        @return bool
     */
    function _storeRebase( uint previousCirculating_, uint profit_, uint epoch_ ) internal returns ( bool ) {
        uint rebasePercent = profit_.mul( 1e18 ).div( previousCirculating_ );

        rebases.push( Rebase ( {
            epoch: epoch_,
            rebase: rebasePercent, // 18 decimals
            totalStakedBefore: previousCirculating_,
            totalStakedAfter: circulatingSupply(),
            amountRebased: profit_,
            index: index(),
            timeOccured: uint32(block.timestamp)
        }));
        
        emit LogSupply( epoch_, block.timestamp, _totalSupply );
        emit LogRebase( epoch_, rebasePercent, index() );

        return true;
    }

    function balanceOf( address who ) public view override returns ( uint256 ) {
        return _gonBalances[ who ].div( _gonsPerFragment );
    }

    function gonsForBalance( uint amount ) public view returns ( uint ) {
        return amount.mul( _gonsPerFragment );
    }

    function balanceForGons( uint gons ) public view returns ( uint ) {
        return gons.div( _gonsPerFragment );
    }

    // Staking contract holds excess MEMOries
    function circulatingSupply() public view returns ( uint ) {
        return _totalSupply.sub( balanceOf( stakingContract ) );
    }

    function index() public view returns ( uint ) {
        return balanceForGons( INDEX );
    }

    function transfer( address to, uint256 value ) public override returns (bool) {
        uint256 gonValue = value.mul( _gonsPerFragment );
        _gonBalances[ msg.sender ] = _gonBalances[ msg.sender ].sub( gonValue );
        _gonBalances[ to ] = _gonBalances[ to ].add( gonValue );
        emit Transfer( msg.sender, to, value );
        return true;
    }

    function allowance( address owner_, address spender ) public view override returns ( uint256 ) {
        return _allowedValue[ owner_ ][ spender ];
    }

    function transferFrom( address from, address to, uint256 value ) public override returns ( bool ) {
       _allowedValue[ from ][ msg.sender ] = _allowedValue[ from ][ msg.sender ].sub( value );
       emit Approval( from, msg.sender,  _allowedValue[ from ][ msg.sender ] );

        uint256 gonValue = gonsForBalance( value );
        _gonBalances[ from ] = _gonBalances[from].sub( gonValue );
        _gonBalances[ to ] = _gonBalances[to].add( gonValue );
        emit Transfer( from, to, value );

        return true;
    }

    function approve( address spender, uint256 value ) public override returns (bool) {
         _allowedValue[ msg.sender ][ spender ] = value;
         emit Approval( msg.sender, spender, value );
         return true;
    }

    // What gets called in a permit
    function _approve( address owner, address spender, uint256 value ) internal override virtual {
        _allowedValue[owner][spender] = value;
        emit Approval( owner, spender, value );
    }

    function increaseAllowance( address spender, uint256 addedValue ) public override returns (bool) {
        _allowedValue[ msg.sender ][ spender ] = _allowedValue[ msg.sender ][ spender ].add( addedValue );
        emit Approval( msg.sender, spender, _allowedValue[ msg.sender ][ spender ] );
        return true;
    }

    function decreaseAllowance( address spender, uint256 subtractedValue ) public override returns (bool) {
        uint256 oldValue = _allowedValue[ msg.sender ][ spender ];
        if (subtractedValue >= oldValue) {
            _allowedValue[ msg.sender ][ spender ] = 0;
        } else {
            _allowedValue[ msg.sender ][ spender ] = oldValue.sub( subtractedValue );
        }
        emit Approval( msg.sender, spender, _allowedValue[ msg.sender ][ spender ] );
        return true;
    }
}

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"epoch","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"rebase","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"index","type":"uint256"}],"name":"LogRebase","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"stakingContract","type":"address"}],"name":"LogStakingContractUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"epoch","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"totalSupply","type":"uint256"}],"name":"LogSupply","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipPulled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipPushed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"INDEX","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PERMIT_TYPEHASH","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner_","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"gons","type":"uint256"}],"name":"balanceForGons","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"who","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"circulatingSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"gonsForBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"index","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"stakingContract_","type":"address"}],"name":"initialize","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"initializer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"manager","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"pullManagement","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner_","type":"address"}],"name":"pushManagement","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"profit_","type":"uint256"},{"internalType":"uint256","name":"epoch_","type":"uint256"}],"name":"rebase","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"rebases","outputs":[{"internalType":"uint256","name":"epoch","type":"uint256"},{"internalType":"uint256","name":"rebase","type":"uint256"},{"internalType":"uint256","name":"totalStakedBefore","type":"uint256"},{"internalType":"uint256","name":"totalStakedAfter","type":"uint256"},{"internalType":"uint256","name":"amountRebased","type":"uint256"},{"internalType":"uint256","name":"index","type":"uint256"},{"internalType":"uint32","name":"timeOccured","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceManagement","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_INDEX","type":"uint256"}],"name":"setIndex","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"stakingContract","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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

34789:7489:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;37380:894;;;;;;;;;;;;;;;;-1:-1:-1;37380:894:0;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;20104:77;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34121:159;;;:::i;:::-;;40964:226;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;40964:226:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;21187:94;;;:::i;39334:124::-;;;;;;;;;;;;;;;;-1:-1:-1;39334:124:0;;:::i;40419:537::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;40419:537:0;;;;;;;;;;;;;;;;;:::i;39781:95::-;;;:::i;35550:17::-;;;:::i;31650:108::-;;;:::i;21029:77::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;31767:31;;;:::i;41441:322::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;41441:322:0;;;;;;;;:::i;37027:178::-;;;;;;;;;;;;;;;;-1:-1:-1;37027:178:0;;:::i;34288:261::-;;;;;;;;;;;;;;;;-1:-1:-1;34288:261:0;-1:-1:-1;;;;;34288:261:0;;:::i;33894:90::-;;;:::i;:::-;;;;-1:-1:-1;;;;;33894:90:0;;;;;;;;;;;;;;34561:221;;;:::i;39182:144::-;;;;;;;;;;;;;;;;-1:-1:-1;39182:144:0;-1:-1:-1;;;;;39182:144:0;;:::i;35518:23::-;;;;;;;;;;;;;;;;-1:-1:-1;35518:23:0;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;39466:120;;;;;;;;;;;;;;;;-1:-1:-1;39466:120:0;;:::i;33146:::-;;;;;;;;;;;;;;;;-1:-1:-1;33146:120:0;-1:-1:-1;;;;;33146:120:0;;:::i;39641:132::-;;;:::i;20314:81::-;;;:::i;35022:26::-;;;:::i;41771:504::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;41771:504:0;;;;;;;;:::i;39884:364::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;39884:364:0;;;;;;;;:::i;36537:482::-;;;;;;;;;;;;;;;;-1:-1:-1;36537:482:0;-1:-1:-1;;;;;36537:482:0;;:::i;32308:770::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;32308:770:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;40256:155::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;40256:155:0;;;;;;;;;;:::i;34985:30::-;;;:::i;37380:894::-;34940:15;;37467:7;;-1:-1:-1;;;;;34940:15:0;34926:10;:29;34917:40;;;;;;37488:20:::1;37519:26:::0;37548:19:::1;:17;:19::i;:::-;37519:48:::0;-1:-1:-1;37585:12:0;37580:372:::1;;37656:12;::::0;37620:50:::1;::::0;;37639:15:::1;37620:50:::0;;::::1;::::0;::::1;::::0;;;;;;37631:6;;37620:50:::1;::::0;;;;;;;::::1;37701:6;37690:31;37709:1;37712:7;:5;:7::i;:::-;37690:31;::::0;;;;;::::1;::::0;::::1;::::0;;;;;;;;;;;;::::1;37743:12;;37736:19;;;;;;37580:372;37778:22:::0;;37773:179:::1;;37832:53;37865:18;37832:27;37845:12;;37832:7;:11;;:27;;;;:::i;:::-;:31:::0;::::1;:53::i;:::-;37817:68;;37773:179;;;37933:7;37918:22;;37773:179;37979:12;::::0;:32:::1;::::0;37997:12;37979:16:::1;:32::i;:::-;37964:12;:47:::0;;;38044:10:::1;-1:-1:-1::0;38024:85:0::1;;;38087:10;38072:12;:25:::0;38024:85:::1;38156:12;::::0;38140:30:::1;::::0;-1:-1:-1;;35922:54:0;38140:14:::1;:30::i;:::-;38121:16;:49:::0;38183:51:::1;38197:18:::0;38217:7;38226:6;38183:12:::1;:51::i;:::-;;38254:12;;38247:19;;;;34968:1;37380:894:::0;;;;:::o;20104:77::-;20170:5;20163:12;;;;;;;;-1:-1:-1;;20163:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;20141:13;;20163:12;;20170:5;;20163:12;;20170:5;20163:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;20104:77;:::o;34121:159::-;34035:6;;-1:-1:-1;;;;;34035:6:0;34045:10;34035:20;34026:67;;;;;-1:-1:-1;;;34026:67:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34222:6:::1;::::0;34205:37:::1;::::0;34238:1:::1;::::0;-1:-1:-1;;;;;34222:6:0::1;::::0;34205:37:::1;::::0;34238:1;;34205:37:::1;34253:6;:19:::0;;-1:-1:-1;;;;;;34253:19:0::1;::::0;;34121:159::o;40964:226::-;41073:10;41040:4;41058:27;;;:13;:27;;;;;;;;-1:-1:-1;;;;;41058:38:0;;;;;;;;;;;:46;;;41121:38;;;;;;;41040:4;;41058:38;;41073:10;;41121:38;;;;;;;;-1:-1:-1;41178:4:0;40964:226;;;;:::o;21187:94::-;21263:12;;21187:94;:::o;39334:124::-;39395:4;39420:30;39432:16;;39420:6;:10;;:30;;;;:::i;40419:537::-;-1:-1:-1;;;;;40565:21:0;;40510:4;40565:21;;;:13;:21;;;;;;;;40588:10;40565:35;;;;;;;;:48;;40606:5;40565:39;:48::i;:::-;-1:-1:-1;;;;;40527:21:0;;;;;;:13;:21;;;;;;;;40550:10;40527:35;;;;;;;;;;:86;;;40628:66;;;;;;40550:10;;40628:66;;;;;;;;;;;40707:16;40726:23;40742:5;40726:14;:23::i;:::-;-1:-1:-1;;;;;40783:18:0;;;;;;:12;:18;;;;;;40707:42;;-1:-1:-1;40783:34:0;;40707:42;40783:22;:34::i;:::-;-1:-1:-1;;;;;40760:20:0;;;;;;;:12;:20;;;;;;:57;;;;40849:16;;;;;;;:32;;40871:8;40849:20;:32::i;:::-;-1:-1:-1;;;;;40828:18:0;;;;;;;:12;:18;;;;;;;;;:53;;;;40897:27;;;;;;;40828:18;;40897:27;;;;;;;;;;;;;-1:-1:-1;40944:4:0;;40419:537;-1:-1:-1;;;;40419:537:0:o;39781:95::-;39820:4;39845:23;39861:5;;39845:14;:23::i;:::-;39838:30;;39781:95;:::o;35550:17::-;;;;:::o;31650:108::-;31692:66;31650:108;:::o;21029:77::-;21091:9;;;;21029:77;:::o;31767:31::-;;;;:::o;41441:322::-;41605:10;41532:4;41590:27;;;:13;:27;;;;;;;;-1:-1:-1;;;;;41590:38:0;;;;;;;;;;:56;;41634:10;41590:42;:56::i;:::-;41564:10;41549:27;;;;:13;:27;;;;;;;;-1:-1:-1;;;;;41549:38:0;;;;;;;;;;;;:97;;;41662:71;;;;;;41549:38;;41662:71;;;;;;;;;;;-1:-1:-1;41751:4:0;41441:322;;;;:::o;37027:178::-;34035:6;;37093:4;;-1:-1:-1;;;;;34035:6:0;34045:10;34035:20;34026:67;;;;;-1:-1:-1;;;34026:67:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;37120:5:::1;::::0;:10;37111:21:::1;;;::::0;::::1;;37151:24;37167:6;37151:14;:24::i;:::-;37143:5;:32:::0;-1:-1:-1;37193:4:0::1;37027:178:::0;;;:::o;34288:261::-;34035:6;;-1:-1:-1;;;;;34035:6:0;34045:10;34035:20;34026:67;;;;;-1:-1:-1;;;34026:67:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;34391:23:0;::::1;34382:75;;;;-1:-1:-1::0;;;34382:75:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34490:6;::::0;34473:36:::1;::::0;-1:-1:-1;;;;;34473:36:0;;::::1;::::0;34490:6:::1;::::0;34473:36:::1;::::0;34490:6:::1;::::0;34473:36:::1;34520:9;:21:::0;;-1:-1:-1;;;;;;34520:21:0::1;-1:-1:-1::0;;;;;34520:21:0;;;::::1;::::0;;;::::1;::::0;;34288:261::o;33894:90::-;33970:6;;-1:-1:-1;;;;;33970:6:0;33894:90;:::o;34561:221::-;34645:9;;-1:-1:-1;;;;;34645:9:0;34631:10;:23;34622:71;;;;-1:-1:-1;;;34622:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34734:9;;34726:6;;34709:36;;-1:-1:-1;;;;;34734:9:0;;;;34726:6;;;;34709:36;;34734:9;;34709:36;34765:9;;34756:6;:18;;-1:-1:-1;;;;;;34756:18:0;-1:-1:-1;;;;;34765:9:0;;;34756:18;;;;;;34561:221::o;39182:144::-;39300:16;;-1:-1:-1;;;;;39275:19:0;;39247:7;39275:19;;;:12;:19;;;;;;39247:7;;39275:43;;:19;:23;:43::i;35518:23::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;35518:23:0;;;;;;;;;;;:::o;39466:120::-;39525:4;39550:28;39560:16;;39550:4;:8;;:28;;;;:::i;33146:120::-;-1:-1:-1;;;;;33234:14:0;;33207:7;33234:14;;;:7;:14;;;;;:24;;:22;:24::i;39641:132::-;39746:15;;39692:4;;39717:48;;39735:28;;-1:-1:-1;;;;;39746:15:0;39735:9;:28::i;:::-;39717:12;;;:16;:48::i;20314:81::-;20382:7;20375:14;;;;;;;;-1:-1:-1;;20375:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;20353:13;;20375:14;;20382:7;;20375:14;;20382:7;20375:14;;;;;;;;;;;;;;;;;;;;;;;;35022:26;;;-1:-1:-1;;;;;35022:26:0;;:::o;41771:504::-;41918:10;41867:4;41903:27;;;:13;:27;;;;;;;;-1:-1:-1;;;;;41903:38:0;;;;;;;;;;41956:27;;;41952:207;;42015:10;42041:1;42000:27;;;:13;:27;;;;;;;;-1:-1:-1;;;;;42000:38:0;;;;;;;;;:42;41952:207;;;42116:31;:8;42130:15;42116:12;:31::i;:::-;42090:10;42075:27;;;;:13;:27;;;;;;;;-1:-1:-1;;;;;42075:38:0;;;;;;;;;:72;41952:207;42184:10;42205:27;;;;:13;:27;;;;;;;;-1:-1:-1;;;;;42174:71:0;;42205:38;;;;;;;;;;;42174:71;;;;;;;;;42184:10;42174:71;;;;;;;;;;;-1:-1:-1;42263:4:0;;41771:504;-1:-1:-1;;;41771:504:0:o;39884:364::-;39956:4;39973:16;39992:29;40003:16;;39992:5;:9;;:29;;;;:::i;:::-;40075:10;40061:26;;;;:12;:26;;;;;;39973:48;;-1:-1:-1;40061:42:0;;39973:48;40061:30;:42::i;:::-;40046:10;40032:26;;;;:12;:26;;;;;;:71;;;;-1:-1:-1;;;;;40135:18:0;;;;;;:34;;40159:8;40135:22;:34::i;:::-;-1:-1:-1;;;;;40114:18:0;;;;;;:12;:18;;;;;;;;;:55;;;;40185:33;;;;;;;40114:18;;40195:10;;40185:33;;;;;;;;;;-1:-1:-1;40236:4:0;;39884:364;-1:-1:-1;;;39884:364:0:o;36537:482::-;36645:11;;36604:4;;-1:-1:-1;;;;;36645:11:0;36631:10;:25;36622:36;;;;;;-1:-1:-1;;;;;36678:30:0;;36669:41;;;;;;36721:15;:34;;-1:-1:-1;;;;;;36721:34:0;-1:-1:-1;;;;;36721:34:0;;;;;;;;;;36780:15;;-1:-1:-1;36766:31:0;;;:12;:31;;;;;;;;-1:-1:-1;;36766:44:0;;36852:15;;36869:12;;36828:55;;;;;;;36852:15;;;-1:-1:-1;;36828:55:0;;;;;;;;;;36899:45;;;-1:-1:-1;;;;;36899:45:0;;;;;;;;;;;;;;;-1:-1:-1;;36965:11:0;:24;;-1:-1:-1;;;;;;36965:24:0;;;-1:-1:-1;;36537:482:0:o;32308:770::-;32553:8;32534:15;:27;;32526:64;;;;;-1:-1:-1;;;32526:64:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;32699:14:0;;32603:18;32699:14;;;:7;:14;;;;;31692:66;;32675:5;;32682:7;;32691:6;;32699:24;;:22;:24::i;:::-;32647:87;;;;;;;;;;;-1:-1:-1;;;;;32647:87:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32637:98;;;;;;32807:16;;32774:62;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32764:73;;;;;;;;;-1:-1:-1;32867:25:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32637:98;;-1:-1:-1;32764:73:0;;32867:25;;;;;;;-1:-1:-1;;32867:25:0;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;32867:25:0;;-1:-1:-1;;32867:25:0;;;-1:-1:-1;;;;;;;32911:20:0;;;;;;:39;;;32945:5;-1:-1:-1;;;;;32935:15:0;:6;-1:-1:-1;;;;;32935:15:0;;32911:39;32903:85;;;;-1:-1:-1;;;32903:85:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;33001:14:0;;;;;;:7;:14;;;;;:26;;:24;:26::i;:::-;33038:32;33047:5;33054:7;33063:6;33038:8;:32::i;:::-;32308:770;;;;;;;;;;:::o;40256:155::-;-1:-1:-1;;;;;40369:23:0;;;40341:7;40369:23;;;:13;:23;;;;;;;;:34;;;;;;;;;;;;;40256:155::o;34985:30::-;;;-1:-1:-1;;;;;34985:30:0;;:::o;3216:132::-;3274:7;3301:39;3305:1;3308;3301:39;;;;;;;;;;;;;;;;;:3;:39::i;:::-;3294:46;3216:132;-1:-1:-1;;;3216:132:0:o;2269:471::-;2327:7;2572:6;2568:47;;-1:-1:-1;2602:1:0;2595:8;;2568:47;2639:5;;;2643:1;2639;:5;:1;2663:5;;;;;:10;2655:56;;;;-1:-1:-1;;;2655:56:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;915:181;973:7;1005:5;;;1029:6;;;;1021:46;;;;;-1:-1:-1;;;1021:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;38473:701;38570:4;;38609:47;38634:20;38609:19;:7;38622:4;38609:11;:19::i;:47::-;38588:68;;38669:7;38683:323;;;;;;;;38714:6;38683:323;;;;38743:13;38683:323;;;;38805:20;38683:323;;;;38858:19;:17;:19::i;:::-;38683:323;;;;38907:7;38683:323;;;;38936:7;:5;:7::i;:::-;38683:323;;38978:15;38683:323;;;;;;;;;38669:338;;;;;;;;-1:-1:-1;38669:338:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;38669:338:0;;;;;;;;;;;39069:12;;39033:50;;;;;;;;;;;39044:6;;39033:50;;;;;;;;39110:6;39099:43;39118:13;39133:7;:5;:7::i;:::-;39099:43;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;39162:4:0;;38473:701;-1:-1:-1;;;;38473:701:0:o;1379:136::-;1437:7;1464:43;1468:1;1471;1464:43;;;;;;;;;;;;;;;;;:3;:43::i;29473:114::-;29565:14;;29473:114::o;29595:181::-;29749:19;;29767:1;29749:19;;;29595:181::o;41235:198::-;-1:-1:-1;;;;;41339:20:0;;;;;;;:13;:20;;;;;;;;:29;;;;;;;;;;;;;:37;;;41392:33;;;;;;;;;;;;;;;;;41235:198;;;:::o;3844:278::-;3930:7;3965:12;3958:5;3950:28;;;;-1:-1:-1;;;3950:28:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3989:9;4005:1;4001;:5;;;;;;;3844:278;-1:-1:-1;;;;;3844:278:0:o;1818:192::-;1904:7;1940:12;1932:6;;;;1924:29;;;;-1:-1:-1;;;1924:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;1976:5:0;;;1818:192::o

ipfs://872f72bbc9f44f4d348809034f264a95458a6dcce3f0d78f4c8cf28e28e5465c