Contract 0x121B325e75132CaEe6d8e1DbE7Dc3a0B90Eb60C1

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";

struct TokenData {
  ERC20 token;
  bool exists;
}

struct RecipientTokenData {
  TokenData token_data;
  uint8 fee_percent;
}

// Contract for processing transactions
contract PaymentsProcessor is Ownable {
  using SafeMath for uint256;
  // Mapping from token cocntract address to ERC20 object
  mapping(address => TokenData) public available_tokens;

  // Mapping from recipient address to (ERC20 , fee) object 
  mapping(address => mapping(address => RecipientTokenData)) private recipients_erc20_fees;

  // Mapping from recipient address to native coin fee 
  mapping(address => uint8) private recipients_native_coin_fees;

  // Events for logging transactions
  event ERC20Transaction(address indexed token, address indexed from, address indexed to, uint256 value);
  event NativeCoinTransaction(address indexed from, address indexed to, uint256 value);

  // Constructor to initialize contract with available token contracts addresses
  constructor(address[] memory token_addresses) {
    for (uint256 i = 0; i < token_addresses.length; i++) {
      available_tokens[token_addresses[i]] = TokenData(ERC20(token_addresses[i]), true);
    }
  }

  // Function to set fee percentage for a specific ERC20 token address for a given recipient
  // Returns true on success
  function setERC20Fee(address receipient, address token_address ,uint8 fee_percent) public onlyOwner returns (bool) {
    // Fee must be in range (0, 100)
    require(fee_percent < 100, "Fee percent must be less than 100%");
    require(fee_percent > 0, "Fee percent must be greater than 0%");
    require(available_tokens[token_address].exists, "Unsupported token address");
    recipients_erc20_fees[receipient][token_address] = RecipientTokenData(available_tokens[token_address], fee_percent);
    return true;
  }

  // Function to set fee percentage for a native blockchain coin for a given recipient
  // Returns true on success
  function setNativeCoinFee(address receipient, uint8 fee_percent) public onlyOwner returns (bool) {
    // Fee must be in range (0, 100)
    require(fee_percent < 100, "Fee percent must be less than 100%");
    require(fee_percent > 0, "Fee percent must be greater than 0%");
    recipients_native_coin_fees[receipient] = fee_percent;
    return true;
  }

  // Function to get the fee percentage for a specific ERC20 token address for a given recipient
  function getERC20Fee(address receipient, address token_address) public onlyOwner view returns (uint8) {
    require(available_tokens[token_address].exists, "Unsupported token address");
    return recipients_erc20_fees[receipient][token_address].fee_percent;
  }

  // Function to get the fee percentage for a native blockchain coin for a given recipient
  function getNativeCoinFee(address receipient) public onlyOwner view returns (uint8){
    return recipients_native_coin_fees[receipient];
  }

  // Function to add a new ERC20 token to mapping of available tokens
  // Returns true on success
  function addERC20Token(address token_address) public onlyOwner returns (bool) {
    require(!available_tokens[token_address].exists, "Token address already exists");
    available_tokens[token_address] = TokenData(ERC20(token_address), true);
    return true;
  }


  // Function to process ERC20 transaction for a given recipient
  function processTransactionERC20(address token_address, address from, address to, uint256 value) public {
    // Ensure that the token contract is registered with the processor
    require(available_tokens[token_address].exists, "Token contract not registered with processor");
    // Ensure that the from address has sufficient balance
    require(available_tokens[token_address].token.balanceOf(from) >= value, "Insufficient balance for sender");
    // Ensure that value is a positive number
    require(value > 0, "Tokens amount must be greater than zero");
    // Get fee percent for the givan recipient and token 
    uint8 fee_percent = recipients_erc20_fees[to][token_address].fee_percent;
    // Calculate the amount to transfer to the recipient
    uint256 fee_amount = value.mul(fee_percent).div(100);
    // Transfer the value from sender to the contract
    available_tokens[token_address].token.transferFrom(from, address(this), value);
    // Transfer fee from contract to owner
    available_tokens[token_address].token.transfer(owner(), fee_amount);
    // Transfer (value - fee) to `to` address
    available_tokens[token_address].token.transfer(to, value.sub(fee_amount));
    // Emit transaction event
    emit ERC20Transaction(token_address, from, to, value);
  }

   // Function to process native coin transaction for a given recipient
   function processTransactionNative(address payable recipient) public payable {
    // Ensure that msg.value is a positive number
    require(msg.value > 0, "Value to process must be greater than zero");
    // Get recipient fee percent
    uint8 fee_percent = recipients_native_coin_fees[recipient];
    // Calculate fee amount
    uint256 fee_amount = msg.value.mul(fee_percent).div(100);
    // Calculate the amount to transfer to the recipient
    uint256 amount_to_recipient = msg.value - fee_amount;
    // Transfer the amount to the recipient
    recipient.transfer(amount_to_recipient);
    // Transfer the fee amount to the owner
    payable(owner()).transfer(fee_amount);
    // Emit transaction event
    emit NativeCoinTransaction(msg.sender, recipient, amount_to_recipient);
  }

}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"inputs":[{"internalType":"address[]","name":"token_addresses","type":"address[]"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"ERC20Transaction","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"NativeCoinTransaction","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"address","name":"token_address","type":"address"}],"name":"addERC20Token","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"available_tokens","outputs":[{"internalType":"contract ERC20","name":"token","type":"address"},{"internalType":"bool","name":"exists","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receipient","type":"address"},{"internalType":"address","name":"token_address","type":"address"}],"name":"getERC20Fee","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receipient","type":"address"}],"name":"getNativeCoinFee","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token_address","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"processTransactionERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"recipient","type":"address"}],"name":"processTransactionNative","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receipient","type":"address"},{"internalType":"address","name":"token_address","type":"address"},{"internalType":"uint8","name":"fee_percent","type":"uint8"}],"name":"setERC20Fee","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receipient","type":"address"},{"internalType":"uint8","name":"fee_percent","type":"uint8"}],"name":"setNativeCoinFee","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000000000000000000000000000000000000000002000000000000000000000000000000000000000000000000000000000000000030000000000000000000000009702230a8ea53601f5cd2dc00fdbc13d4df4a8c7000000000000000000000000b97ef9ef8734c71904d8002f8b6bc66dd9c48a6e000000000000000000000000b31f66aa3c1e785363f0875a1b74e27b85fd66c7

-----Decoded View---------------
Arg [0] : token_addresses (address[]): 0x9702230a8ea53601f5cd2dc00fdbc13d4df4a8c7,0xb97ef9ef8734c71904d8002f8b6bc66dd9c48a6e,0xb31f66aa3c1e785363f0875a1b74e27b85fd66c7

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 0000000000000000000000000000000000000000000000000000000000000020
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000003
Arg [2] : 0000000000000000000000009702230a8ea53601f5cd2dc00fdbc13d4df4a8c7
Arg [3] : 000000000000000000000000b97ef9ef8734c71904d8002f8b6bc66dd9c48a6e
Arg [4] : 000000000000000000000000b31f66aa3c1e785363f0875a1b74e27b85fd66c7